Distribuitor de Alimentare Furutech E-TP80ES NCF

5.565 lei / Bucata 5.009 lei / Bucata

La comandă / În stoc furnizor
- 10%

Distribuitor de Alimentare Furutech E-TP80ES NCF

5.565 lei / Bucata 5.009 lei / Bucata

Disponibilitate: În Stoc Furnizor * Verificati disponibilitatea produsului! SKU: e-TP-80ES NCF Categorii: ,


    Suna pentru cea mai buna oferta!

    Oferta personalizata si reducere pentru 2 sau mai multe produse.

    Suna acum si afla!

    0721 429 099


    sistem de rate online

    plată cu cadrul Edenred în magazin

    plăți cu Cardurile și Tichetele Sodexo

    plăți în rate prin Netopia


    Spune-ți părerea



    Alertă preț

    Descriere

    Distribuitor Alimentare Furutech e-TP80ES NCF

    Distribuitor de putere High End cu 8 buctii de prize. GC-303 Acoperire interna absorbanta EMI, 4 buc prize nefiltrate si 4 buc prize EMI cu zgomot filtrat. Toate prizele contin formula NCF.

    Nano Crystal² Formula (NCF).

    Incorporated into selected Furutech products, NCF features a special crystalline material that has two ‘active’ properties. First, it generates negative ions that eliminate static. Second, it converts thermal energy into far infrared. Furutech combines this remarkable material with Nano-sized ceramic particles and carbon powder for their additional ‘piezoelectric effect’ damping properties. The resulting Nano Crystal² Formula is the ultimate electrical and mechanical damping material. Created by Furutech, it is found exclusively in Furutech products.

    The e-TP80S NCF is a sophisticated, luxuriously made power distributor that eliminates many common problems found with audio and video components caused by massively contaminated electrical power.
    The AC waveform becomes severely distorted by ground noise, voltage spikes and sags, high frequency power supply noise from other components in your own system, plus radiated high frequency digital noise from processors and digital interconnects.

    There are also distortion products at the top and bottom of the AC waveform created by switch-mode power supplies in electronic devices on the same circuit. Additionally, you’re never alone; your residential AC mains supply is shared with other apartments, homes, and businesses on the same utility transformer. That’s why many audio and video enthusiasts notice their systems are more enjoyable late at night or on weekends!

    The beautifully crafted special grade aluminum chassis effectively shields against another common problem, RFI (Radio Frequency Interference), and a layer of Formula GC-303 blocks EMI (Electro Magnetic Interference).
    Internal wiring is FURUTECH μ-14 wire (14 AWG) that guarantees low resistance. Furutech Hyper Quality Audio Grade Receptacles (e-TP80ES NCF: schuko sockets) are wired to the IEC AC input of the e-TP80S NCF. Receptacles (e-TP80ES NCF: schuko sockets) feature rhodium-plated phosphor bronze, non-magnetic conductors for stable, long lasting, optimized power transfer.

    Furutech’s Two-Stage Cryogenic and Demagnetization Alpha Process

    Using cutting-edge technology and materials, Furutech developed a low-temperature two-stage process that significantly improves every facet of audio and video performance. The treatment begins during the manufacturing process with a deep, conditioning cryogenic freeze of all metal parts. Using high-end refrigerants – liquid N2 or He – Furutech achieves temperatures of between -196 to -250℃. The treated parts actually change their molecular structure at these extremes of temperature relieving internal stress. The molecules bond together more tightly, and the overall structure becomes more stable. This improves electrical conductivity and so power and signal transfer.
    Step two in the Alpha Process exposes these same parts to the patented Ring Demagnetization treatment. Ordinary high-power magnets used for this purpose often increase magnetic effects; they leave some areas more magnetized than others. This patented process uses controlled attenuation to completely eliminate magnetization for immediately more vivid and colorful improvements. Ring Demagnetization further enhances conductivity of all treated materials.
    ALL metallic parts used in Furutech products go through the Alpha Process treatment to keep all connectors, conductors, and metal parts in a perfect stress-free, stable and highly conductive state.

    Formula GC-303

    GC-303 is a special material Furutech bonds to the interior bottom-plate of the chassis (see illustration below) that absorbs any EMI (Electromagnetic Interference) noise that may be transmitted through your power source or generated by the internal fittings of the unit.
    The Final Result
    The 2-Step Cryogenic and Demagnetizing Alpha Process works in tandem with other design-in features to create the most optimized AC power transfer possible. Furutech’s total awareness and devotion to detail results in a greater sense of power, dynamics, and resolution, with cleaner, blacker backgrounds and a larger, more stable soundstage, vivid tonal colors and deeper extension at both ends of the frequency range. The e-TP80S NCF will allow the delicacy, refinement and nuance of a performance through, along with micro- and macro-dynamics that will leave you breathlessly engaged. Displays of all types will exhibit greater, sharper resolution with less ghosting, color shift, “snow”, or vertical and horizontal lines.

    Furutech’s new e-TP80S series features audio grade FILTER and MOV circuitry:

    • Combined EMI Filter and Surge protection
    • Voltage fluctuations, electrical storms and power spikes can damage sensitive electronics. Furutech’s e-TP80S NCF is fitted with a surge protector for that important layer of defense to protect your system.
    • During a voltage spike event, the e-TP80S NCF’s new MOV circuitry will automatically cut power to the main circuit board EMI filter line to prevent short circuit and protect your system. In addition, the audio grade MOV circuitry will damp any electrical and mechanical resonance caused by electrical resistance, heat and power flow.
    • For convenience LEDs indicate normal function of the e-TP80S NCF surge protection function and EMI filters. When the LEDs are “on” you are noise free and surge protected.

     

    Specification

    e-TP80S NCF specifications:

    • Voltage: AC 125V 50/60Hz
    • Fuse current: 15 A
    • Loading watt: 1875 W
    • Grounding outlet: 8 Holes
    • Overload protective type: Automatic circuit (replacement of varistor required after surge protection event)
    • Insulation volt.:  AC 1500V 1 MINUTE 5mA
    • Leakage current: Under 1.0mA
    • Max. Spike voltage: 6000V
    • Max. Clamping voltage: 360V (8×20μSec)
    • Max. Surge current: 4500A (8×20μSec)
    • Noise Filter: -20db~92db (2~100Mhz)
    • Energy (2ms):40J
    • Insulation resistance: 300MΩ Above DC 500V
    • Body material: AL. ALLOY PLATE (PAINTED)
    • Power indicator: LED
    • Surge protection indicator: LED
    • Beautifully engineered rhodium-plating treatment nonmagnetic Phosphor bronze receptacles.
    • Receptacle insulated with RoHS compliant special audio grade nylon/fiberglass with a special anti-resonance nano-sized crystalline, piezo ceramic particles and carbon damping material body with special anti-resonance nano-sized crystalline “NCF” material polycarbonate cover for improved vibration damping.
    • Furutech’s Top high-end audio grade IEC inlet FI-06 NCF(R)
    • Formula GC-303
    • High-quality nano ceramic particle composite Isolator Footers.
    • Outward size: 400X130X60 mm approx.
    • Net Weight: 1.8Kg approx.

    e-TP80ES NCF specifications:

    • Voltage: AC 250V 50/60Hz
    • Fuse current: 10 A
    • Loading watt: 2500 W
    • Grounding outlet: 8 Holes
    • Overload protective type: Automatic circuit (replacement of varistor required after surge protection event)
    • Insulation volt.:  AC 1500V 1 MINUTE 5mA
    • Leakage current: Under 1.0mA
    • Max. Spike voltage: 6000V
    • Max. Clamping voltage: 360V (8×20μSec)
    • Max. Surge current: 4500A (8×20μSec)
    • Noise Filter: -20db~92db (2~100Mhz)
    • Energy (2ms):40J
    • Insulation resistance: 300MΩ Above DC 500V
    • Body material: AL. ALLOY PLATE (PAINTED)
    • Power indicator: LED
    • Surge protection indicator: LED
    • High end performance NCF Schuko sockets FI-E30 NCF.
    • Socket insulated with RoHS compliant special audio grade nylon/fiberglass with a special anti-resonance nano-sized crystalline, piezo ceramic particles and carbon damping material body with special anti-resonance nano-sized crystalline “NCF” material polycarbonate cover for improved vibration damping.
    • Furutech’s Top high-end audio grade IEC inlet FI-06 NCF(R)
    • Formula GC-303
    • High-quality nano ceramic particle composite Isolator Footers.
    • Outward size: 400X130X60 mm approx.
    • Net Weight: 1.9Kg approx.

    Informații suplimentare

    Producător

    Disponibilitate

    În Stoc Furnizor * Verificati disponibilitatea produsului!

    Unitate Pret

    Bucata

    Explicatii in ceea ce priveste rodajul echipamentelor, cat si al cablurilor, asezarea optima a echipamentelor in camera de auditie, importanta acusticii camerei si nu in ultimul rand sistemul de alimentare a intregului echipament:

    PENTRU BOXE:

    - Pentru performante optime este necesara pozitionarea boxelor la o distanta de minim 30-40cm de peretele din spate pentru boxele cu bass-reflex in spate, pentru cele cu bass-reflex in fata, recomandam pozitionarea la o distanta de 10-20cm fata de peretele din spate, dar totodata la o distanta de cel putin 50cm fata de peretii laterali. Tineti cont de faptul ca orice piesa de mobilier din incapere, joaca rol de absorbtie fonica, dar si de difuzie fonica daca acestea din urma sunt din materiale ceramica sau oglinzi, geamuri sau alt material reflectorizant. In acest sens, gasiti pe blogul nostru, multiple articole care va pot ajuta

    - Boxele vor ajunge sa functioneze in parametrii recomandati de producator, dupa minim 50 de ore (ideal 100 ore) de functionare la volum mediu. In aceasta perioada de timp, de “rodaj a boxelor”, sunetul va fi la inceput mai artificial, bass-ul nu va fi inca controlat, inaltele rigide iar vocile usor retinute, pe masura ce boxele vor functiona, veti remarca cum bas-ul devine mai controlat, mai prezent si mai voluminos, vocile si sunetele medii devin naturale si mai echilibrate, iar inaltele devin rafinate si detaliate. Exista boxe care necesita un „rodaj” mai amplu de minim 300 de ore mai ales in cazul celor care au difuzoare de kevlar, carbon sau alte materiale de acest tip. Boxele care se „rodeaza” cel mai repede sunt cele care au difuzoare de celuloza.

     

     

    Imbunatatirea sunetului unui sistem audio stereo (Partea I)

    Imbunatatirea sunetului unui sistem audio stereo – (Partea II)

     

    PENTRU AMPLIFICATOARE, DAC-URI, PREAMPLIFICATOARE, RECEIVER STEREO & HOME CINEMA, SURSE DIGITALE AUDIO-VIDEO:

    - Pentru performante optime este necesar „rodarea” echipamentului, In functie de complexitatea componentelor din aparatul dumneavoastra acesta poate dura intre 30-200 ore.

    - Rodajul se face la volum minim, fiind astfel suficient faptul ca acesta este alimentat corect conform manualului de utilizare la 220-230 Volti si trece semnal audio sau video dupa caz prin el.

    - Echipamentul supus „rodajului” va ajunge sa functioneze in parametrii recomandati de producator, dupa perioada mai sus mentionata. In aceasta perioada de timp, de “rodaj”, sunetul va fi la inceput ceva mai artificial, bass-ul nu va fi inca controlat, inaltele rigide iar vocile usor retinute, pe masura ce echipamentul va functiona, veti remarca cum bas-ul devine mai controlat, mai prezent si mai voluminos, vocile si sunetele medii devin naturale si mai echilibrate, iar inaltele devin rafinate si detaliate.

    - In ceea ce priveste echipamentul video precum videoproiector, TV, media player, blueray player, necesita un "rodaj" de cel putin 50 de ore. Lipsa acestuia nu va poate oferi maxim de performanta. "Rodajul" se efectueaza prin simpla utilizare a acestuia, intr-un mod conform specificatiilor mentionate de producator.

     

    PENTRU CABLURI:

    - Pentru performante optime este necesara „rodarea” cablurilor, In functie de complexitatea conductorului folosit, cat si geometriei acestuia, „rodajul” poate dura intre 30-100 ore.

    - Rodajul se face la volum minim, fiind astfel suficient faptul ca va trece semnal audio sau video dupa caz prin el.

    - Cablul supus „rodajului” va ajunge sa functioneze in parametrii recomandati de producator, dupa perioada mai sus mentionata. In aceasta perioada de timp, de “rodaj”, sunetul va fi la inceput ceva mai artificial, pe masura ce cablul va functiona, veti remarca cum bas-ul devine mai controlat, mai prezent si mai voluminos, vocile si sunetele medii devin naturale si mai echilibrate, iar inaltele devin rafinate si detaliate.

     

     

    Articole indrumatoare:

    Dictionar Audiofil

    Tratamentul Acustic si Izolarea Fonica

    Pentru un sistem echilibrat, trebuie tinut cont pe langa asezarea corecta a boxelor in incapere, al echipamentelor, sistemul de alimentare al acestora, tinand cont de instalatia electrica a locatiei.

    Pentru detalii privind aceste aspecte de rodaj si nu numai, va rugam sa ne consultati!

     

    Furutech Furutech este fara niciun dubiu cel mai cunoscut producator de conectori, cabluri, prize si distribuitori de energie din lume. Produsele Furutech nu sunt doar populare in comunitatea DIY, ci sunt omniprezente pentru ca multi producatorii de cabluri high-end folosesc componente Furutech. Compania japoneza si-a facut intrarea pe piata AV in 1988 uimind si acaparand lumea audio-video cu produsele sale. Cu o experienta vasta in fabricare de cabluri, distribuitori de putere, prize, conectori si componente auxiliare, Furutech a dezvoltat metode inovatoare de fabricatie care au permis o scadere semnificativa a nivelului de denaturare a sunetului si eliminarea zgomotului de fond la toate produsele cuprinse in portofoliul lor. Desi fabrica tot tipul de cabluri audio-video de peste 30 de ani, faima le-a fost adusa de conectorii de putere, atat de aclamati in intreaga lume. Toate elementele conductoare Furutech sunt realizate din cupru PCOCC, acoperite cu rodiu si apoi tratate criogenic si demagnetizate intr-un proces complicat. Conectorii Furutech au carcasele realizate din otel nemagnetic ceea ce inhiba rezonanta si folosesc folosesc insertii de carbon, nailon si policarbonat pentru a controla vibratiile. Filozofia Furutech este "transmisia pura" si pentru ca pasionatii de high tech gasesc rapid limitele  conexiunilor de alimentare cu curent alternativ Furutech a dezvoltat produse ce realizeaza un transfer precis al semnalului de orice tip. Atenti la orice detaliu, specialistii Furutech au realizat dispozitive ce elimina electricitatea statica de pe suporturi optice sau vinilului, demagnetizatoare si ionizatoare pentru a elimina smogul electric si pentru a oferi utilizatorului o experienta audio-video senzoriala, fidela si fara distorsiuni, atat de cautata de perfectionisti. In concluzie putem spune ca sunetul se aude cel mai bine doar prin cablurile Furutech. Acestea va vor aduce mult mai aproape de calibrul sunetului de referinta la un pret mult mai mic decat al cablurilor emblematice produse de alte companii.

    Recenzii

    Nu există recenzii până acum.


    Fii primul care adaugi o recenzie la „Distribuitor de Alimentare Furutech E-TP80ES NCF”

    Produse similare