Terminal Boxe Aeco ABI-0611

  • Terminal Boxe Aeco ABI-0611
  • Terminal Boxe Aeco ABI-0611
  • Terminal Boxe Aeco ABI-0611
  • Terminal Boxe Aeco ABI-0611
Echipa AVmall incearca sa mentina acuratetea informatiilor din acesta prezentare. Cu toate acestea, in anumite cazuri, pot aparea mici inadvertente pentru a caror semnalare va suntem recunoscatori. Ne poti contacta oricand pentru a clarifica eventuale nelamuriri. Nu uita sa mentionezi in corespondenta ta numele exact al produsul. Fotografia produsului Terminal Boxe Aeco ABI-0611 are caracter informativ si poate sa difere de produsul real sau sa contina accesorii neincluse in pachetul standard al produsului. Specificatiile tehnice pot contine erori de operare si pot fi schimbate fara instiintare prealabila de catre producator, neconstituind obligativitate contractuala.
299,00 RON / Set 2 Bucati
Disponibilitate: In stoc furnizor

Ai gasit mai ieftin? Suna pentru cea mai buna oferta!

Oferta personalizata si reducere pentru 2 sau mai multe produse. Suna acum si afla!


Cantitate:
+
De la: 49.83 lei / luna
Livrarea este gratuita in Bucuresti si provincie (daca comanda depaseste 299 ron), timpul de livrare este de 24-48 de ore, in cazul in care s-a facut confirmarea livrarii de catre AVmall.

Concept

This product can be use with other binding post which is also suitable with bare wire, banana plug and cable terminal with screw / plug in type.

The body of plug was lathed in one piece to avoid the signal and conduction loss.

The interface was designed in arc concave to increase the tightness and contact with bare wire.

There is a POM part between knob and body to avoid damage when tighten / assemble each other.

By using insulating material between the knob and the body to increasing the overall insulation capability.

The shell of the plug is made of insulation material which is able to isolate the contact with metal and reduce the mutual interference.

Terminal was crosscutting in L shape and a ring with screw. It will be used for solder type or screw type.

The conductor is made from high- purity copper (Tellurium Copper) with gold plating (10u).

By using high quality of design techniques and material to provide customer who has High End requirement.

Mechanical structure:
The body was designed as hollow and lathed in one piece.
The body is fixed with the POM on both front and back.
The binding post is to be assembled from inside of the panel through the opening, tighten by washer and Hex nut.
The special designed of arc concave can increase the tightness and contact with bare wire.
Knob use latch mode to keep POM and inner recesses for better adaptation
All metal components that contact with the panel are insulated with the body of the plug.

The product is suitable with bare wire (D4.0mm), banana plug and cable terminal (6/8mm opening) with screw /plug in type.
The product is suitable for panel, for detail dimension, please refer pictures.
The products is suitable for the maximum 10mm thickness of the panel.
The torque for the nut on this product can be reach to maximum 8 (lb-in).
The torque for the back sleeve can be reach to maximum 6 (lb-in).

Please note that over-torsion can cause damage for the product.

Material:
Body: Tellurium Copper (#C14500 / copper contain over 99%)
Ring: Brass
Screw: Brass
Shell: POM (Black)
Knobs: Brass
Washer: PE (Red/ White)
Nut: Brass

Finish:
ABI-0611
Body: 10u Gold plating ( no nickel base)
Ring: 3u Gold plating ( no nickel base)
​Screw: 3u Gold plating ( no nickel base)

ABI-0611R
Body: Rhodium plating (no nickel base)
Ring: 120u Silver plating (no nickel base)

​Screw: 120u Silver plating (no nickel base)

ABI-0611S
Body: 120u Silver plating (no nickel base)
Ring: 120u Silver plating (no nickel base)

​Screw: 120u Silver plating (no nickel base)

Shell: None
Knobs: Satin nickel + topcoat
Washer: None
Nut: Satin nickel + topcoat

Electrical Characteristics:
Contact resistance < 0.2 mOhm (It was test by ABP-1111.)

Dimension:
Biggest OD: 16.5mm
Total Length: 50.0mm

Packing:
Vacuum Bag(2Pcs/1Set)

Specificatii Terminal Boxe Aeco ABI-0611

Specificatii Recommend soldering temperature:
Temperature Soldering Iron, please keep 450 degree within 10~15 second
Temperature Soldering Iron, please keep 400 degree within 15~20 second
Temperature Soldering Iron, please keep 350 degree within 20~25 second

Nu sunt recenzii pentru Terminal Boxe Aeco ABI-0611. Fii primul care scrie una!


Spune-ti parerea

Trebuie sa fii autentificat pentru a comenta!

Produse similare