Ai gasit mai ieftin? Suna pentru cea mai buna oferta!
Oferta personalizata si reducere pentru 2 sau mai multe produse. Suna acum si afla!
The reference preamplifier from Densen is perhaps the most advanced stereo preamp on the market. It is filled with advanced solutions, which all share one goal: giving you even more musicality.
The volume is controlled by an extremely precise attenuator made of Vishay metal film resistors, which is switched by relays controlled by the microprocessor. Compared to the normal volume potentiometer used in the majority of preamps, the resistor network has virtually no self-induced noise and an extremely low distortion. This results in an unsurpassed precision and refinement, and the attenuator contains no less than 200 steps! This makes it possible to adjust the volume very precisely (0.5 dB) even when the sound is so low that an ordinary volume control would create an uneven balance between left and right.
The B-250XS contains sockets for the SA surround Board and for DP-03 MM stage. It is also possible to upgrade the B-250XS with the DNRG external power supply, further enhancing sound quality and providing truly breathtaking musical experiences.
The DenLink system implemented in all Densen products allows 2-way communication in multiroom installations. On the B-250XS, the link system will allow the user to power up a link amplifier in the kitchen, or somewhere else, and then control the main system in the living room, sending the signals to and from the kitchen for playback in another room. It will still be possible to have full display information in another other room. The DenLink / Multiroom system is also ready for a light controller that will be able to dim the lights in the room.
The amplification stages are all completely new designs, based on advanced class A designs, which have been encapsulated on the motherboard to avoid any kind of interference with the delicate signal. The output stage is a dual mono design with an extraordinarily huge storage capacity (100.000 uF) which would make any other power amplifier envious. This design produces a musicality which is truly outstanding by any standards
External power supplies
The Densen NRG upgrades, are external powersupplies designed to significantly upgrade and improve the performance of Densen products.
It is a effective way of improving the sound, without having to sell your current Densen model, and purchase a larger. A discrete and elegant cure for the ever continuing lust for even better sound from your Densen system.
Comes in 2 versions - DNRG and 2NRG.
Read More
DAC Board
The Densen FabelDAC is a DAC designed to be mounted in the surround slot on Densen Preamps or Integrated amps. It is bacically the DAC from the B-410 with 2 coax digital inputs. It will allow the connection of a digital source directly to a Densen integrated amp/preamp.
FabelDAC gives a fantastic performance for a rather modest price, and allows the use of digital sources like Sonus or Squeezebox or other digital sources you might want to listen to.
Read More
RIAA Board
The DP-03 is an MM board for the B-250XS. The only difference between the DP-01 and DP-03 is the physical shape, which allows them to be used with different Densen products. Despite of the modest price of these two boards, it will offer you a world class RIAA when mounted in any Densen amplifier. Due to the technical design, the DP-03 and DP-01 work with all MM cartridges on the market, and actually do so with an outstanding sound quality.
Read More
Surround Board Upgrade
The SB boards (Surround Boards) are a revolution for new features. The SB boards are add-on boards for all integrated and pre-amplifiers (except the B-200). This is a very easy and sonically superior way to enter the world of home cinema or Super Audio systems. All our products are supplied as dedicated 2-channel products, but with the SB boards you get analogue 5.1 and 7.1 line input and 5.1 and 7.1 line pre-out. This means that you can easily connect a DVD-player or SACD-player with 5.1 analogue out. If you have a system consisting of a pre-amp and 2-channel power-amp, the SA boards let you connect a B-340 (4-channel amplifier) and then have 6-channels (5+1) of high grade amplification. The SB boards are available in 2 versions. The features are the same, only the sound quality differs. The SB-1 is the entry-level version, while SB-2 is the true high-end solution.
Important: Conținutul acestei descrieri de produs a fost tradus automat și poate conține erori atât de vocabular, cât și de sintaxă și gramatică.
Specificatii | Line- & tape inputs: 4 & 1 Preouts: 4 Power supply size: 3x20VA Storage capacity: 100.000uF THD + Noise @ rated output: Less than 0.05% Frequency response (+0 -3db): 2-500.000Hz Weight/shippingweight: 9/11 Kg Product dimensions (WxDxH): 440x310x64mm (*2) |
Tip Echipament | Solid State |
- Pentru performante optime este necesara pozitionarea boxelor la o distanta de minim 30-40cm de peretele din spate pentru boxele cu bass-reflex in spate, pentru cele cu bass-reflex in fata, recomandam pozitionarea la o distanta de 10-20cm fata de peretele din spate.
- Boxele vor ajunge sa functioneze in parametrii recomandati de producator, dupa minim 50 de ore (ideal 100 ore) de functionare la volum mediu. In aceasta perioada de timp, de “rodaj a boxelor”, sunetul va fi la inceput ceva mai artificial, bass-ul nu va fi inca controlat, inaltele rigide iar vocile usor retinute, pe masura ce boxele vor functiona, veti remarca cum bas-ul devine mai controlat, mai prezent si mai voluminos, vocile si sunetele medii devin naturale si mai echilibrate, iar inaltele devin rafinate si detaliate. Exista boxe care necesita un „rodaj” mai amplu de minim 300 de ore mai ales in cazul celor care au difuzoare de kevlar, carbon sau alte materiale de acest tip. Boxele care se „rodeaza” cel mai repede sunt cele care au difuzoare de celuloza.
- Pentru performante optime este necesar „rodarea” echipamentului, In functie de complexitatea componentelor din aparatul dumneavoastra acesta poate dura intre 30-200 ore.
- Rodajul se face la volum minim, fiind astfel suficient faptul ca acesta este alimentat corect conform manualului de utilizare la 220-230 Volti si trece semnal audio sau video dupa caz prin el.
- Echipamentul supus „rodajului” va ajunge sa functioneze in parametrii recomandati de producator, dupa perioada mai sus mentionata. In aceasta perioada de timp, de “rodaj”, sunetul va fi la inceput ceva mai artificial, bass-ul nu va fi inca controlat, inaltele rigide iar vocile usor retinute, pe masura ce echipamentul va functiona, veti remarca cum bas-ul devine mai controlat, mai prezent si mai voluminos, vocile si sunetele medii devin naturale si mai echilibrate, iar inaltele devin rafinate si detaliate.
- Pentru performante optime este necesara „rodarea” cablurilor, In functie de complexitatea conductorului folosit, cat si geometriei acestuia, „rodajul” poate dura intre 30-100 ore.
- Rodajul se face la volum minim, fiind astfel suficient faptul ca va trece semnal audio sau video dupa caz prin el.
- Cablul supus „rodajului” va ajunge sa functioneze in parametrii recomandati de producator, dupa perioada mai sus mentionata. In aceasta perioada de timp, de “rodaj”, sunetul va fi la inceput ceva mai artificial, pe masura ce cablul va functiona, veti remarca cum bas-ul devine mai controlat, mai prezent si mai voluminos, vocile si sunetele medii devin naturale si mai echilibrate, iar inaltele devin rafinate si detaliate.
Pentru detalii privind aceste aspecte de rodaj si nu numai, va rugam sa ne consultati!