Player Auto Kenwood KDC-X5100BT

  • Player Auto Kenwood KDC-X5100BT
  • Player Auto Kenwood KDC-X5100BT
Echipa AVmall incearca sa mentina acuratetea informatiilor din acesta prezentare. Cu toate acestea, in anumite cazuri, pot aparea mici inadvertente pentru a caror semnalare va suntem recunoscatori. Ne poti contacta oricand pentru a clarifica eventuale nelamuriri. Nu uita sa mentionezi in corespondenta ta numele exact al produsul. Fotografia produsului Player Auto Kenwood KDC-X5100BT are caracter informativ si poate sa difere de produsul real sau sa contina accesorii neincluse in pachetul standard al produsului. Specificatiile tehnice pot contine erori de operare si pot fi schimbate fara instiintare prealabila de catre producator, neconstituind obligativitate contractuala.

Disponibilitate: Acest produs nu se mai fabrica, nu mai este disponibil in stoc.

Ai gasit mai ieftin? Suna pentru cea mai buna oferta!

Oferta personalizata si reducere pentru 2 sau mai multe produse. Suna acum si afla!

Livrarea este gratuita in Bucuresti si provincie (daca comanda depaseste 500 ron), timpul de livrare este de 24-48 de ore, in cazul in care s-a facut confirmarea livrarii de catre AVmall.

iPhone / Android Music Playback
Bluetooth handsfree & Audio Streaming Built-in
Built-in NFC for Easy Bluetooth pairing
Kenwood Remote App Remote Ready
13 Band parametric equalizer
Built-in DSP with Time Aligment
16 Digits 2 Line Vertical Alignment LCD
Rear USB & AUX input
USB 1,5A Quick Charge for Smartphone

Specificatii Player Auto Kenwood KDC-X5100BT

Specificatii General Features
DIN Size 1 DIN
Detachable Faceplate Yes
Key Illumination Variable LED
Rotary Encoder & Control Knob Yes
Accent key Bluetooth
Back-up Memory Only Tuner Presets
Touch Sensor Tone Yes
Digital Clock (24H) Yes
All-off Select (20/40/60 minutes) Yes
ISO connector Yes, New Mitsumi to ISO cable
Bluetooth unit built-in Yes
USB interface x 1 Yes, Back Side
Firmware upgreadable Yes
Display Features
Display Type Liquid Crystal Display (LCD)
Display Layout 13Seg X 16 Digit / 1,5 line
Vertical Aligment Liquid Crystal Display Yes
Display Illumination Variable by RGB LED
Dimmer Control Manual / Set by Timer
Brightness control 0 - 31 steps
Demo Mode Yes
Menu text in selectable language English, Spanish, Russian
TAG Language Display English, Spanish, Russian & Greek
Cosmetics features
Front/edge Black Injection
Escutcheon finish Black Injection
Volume & operation knob or wheel Chrome-finished
Triangle Illumination Red
Front terminals dust cover Yes
Key illumination Variable by RGB LED
Display illumination Variable by RGB LED
Brightness Control (Key) 0 - 31 step
Brightness Control (Display) 0 - 31 step
Dimmer Control (Key) Manual / Set by Timer
Dimmer Control (Display) Manual / Set by Timer
Tuner Features
FM Reception Yes
AM (MW/LW) Reception Yes
Tuner Presets (FM/AM) 24 Presets (18FM / 6AM)
Preset memory w/o back-up power Yes
Mixed preset memory (FM & AM) 6 presets
Tuning mode
Up/Down Seek/Scan Yes
Automatic Memory Entry (AME) Yes
FM Stereo / Mono Selector Yes
Radio Data System Yes
Radio Text Plus Yes
Traffic Information Yes
Local search Yes
Auto TP search Yes
Enhanced Other Networks Function (EON) Yes
Program Type Function (PTY) Yes
PTY News Off/0/10/20/.../80/90min
CE_Playable Audio file
AAC (*.m4a) files are playable CD/USB
MP3 files are playable CD/USB
WMA (.wma) files are playable CD/USB
WAV (.wav) files are playable USB
FLAC files are playable USB
CD Features
CD-R/RW Compatible Yes
MP3, WMA & AAC playback Yes
CD Text with special Character Support English, Spanish, Russian & Greek
D.A.C. processing 24 bit
0 bit Mute Yes
Random Function
Repeat Function
Scan Function
USB Features
USB terminal Yes, Rear USB 2.0 (Full Speed)
MP3, WMA, AAC, WAV, FLAC playback Yes
Repeat / Random Play Yes
Direct search Yes
Time code display Yes
1,5A Smartphone Quick Charge Yes
iPod Features
Made for iPod & iPhone * Yes
USB Direct Control with optiona cable KCA-iP102 (40pin) or iP103 (Lightning connector)
Alphabet search Yes
Skip search Yes
Direct Search Yes
iPod EQ Mode Yes
Control by hand Yes
App & iPod control mode Yes
iPod Accessory Protocol (iAP) over Bluetooth
iAP over Bluetooth Yes
Reverse browsing Yes
Voice Control using Siri. Yes
Works with iPod Touch * 5th & 6th generation
Works with iPod Nano * 7th** generation
Works with iPhone * 4S/5/5S/5C/6/6Plus/6S/6S Plus/SE
Battery charge + power control Yes
* Always update to latest Apple firmware
** Apple Lightning - 30 pin adapter required
*** In case of Apple Unit with Lightning Connector only Audio playback Yes
Audio Features
Maximum Output Power 50W x 4
MOSFET Power IC Yes
Auxiliary input Rear side Mini-jack
Pre-out 3 RCA
Pre-out Output Level 4V
Subwoofer Reference Level Adj. Yes
2-Way X'over network Yes
3-Way x'over (bi-amp connection) Yes
Tone Control / Easy EQ 13 band, 8 presets
Balance/Fader Control Yes
Loudness Control Off/Low/High
Bass Boost Circuit Off/+1/+2/+3/+4/+5
Parametric Equalizer + Presets 13-Bands Parametric Equalizer with 8 Presets.
Digital Sound Processor (DSP) Built-in Yes
Digital Time Aligment (DTA) Yes
Low- & High-pass Filter Yes
Kenwood Sound Reconstruction Yes
Space Enhancer Yes
Realizer Yes
Stage EQ Yes
Drive EQ Yes
Extra EQ Yes
Bluetooth General Features
Max num. of regist. phones for HFP & A2DP 5 phones
Hands Free Profile (HPF) V1.6
2 phones fulltime connection Yes
Audio Streaming (A2DP) Yes, (SBC/AAC)
Serial Port Profile (SPP) Yes
Phonebook Access Profile (PBAP) Yes
Audio/Video Remote Control Profile (AVRCP) Yes, V1.5
Wireless Music Browsing (AVRCP 1.5) Yes
iPhone & Android automatic pairing via USB Yes
Voice Dialing / Siri Eyes Free Yes
KENWOOD Music Mix Support Yes
Catchphone / Call Waiting Yes
Private mode Yes
Noise Canceller Yes
Echo Canceller Yes
Phone device status display Yes
Audio device status display Yes
Signal strength display Yes
Remaining battery display Yes
Compatibility check mode Yes
High-quality noise canceling microphone
Bluetooth firmware upgradeable Yes
* depends on phone model/make & Kenwood unit
Connectivity
iPod Digital Connection (1 Wire) Yes, with optional KCA-ip102
OEM Wired Remote Control ready Yes
DC-Cord NEW Mitsumi to ISO
Power Control (P.CON) wire Yes
FM Antenna Input
External microphone input
Tuner Specifications
FM range: 87.5Mhz - 108MHz (50Khz step) Yes
FM Usable Sensitivity 0.71μV/75ohm (S/N 26dBf)
FM Quieting Sensitivity 2μV/75ohm (S/N 46dBf)
FM Frequency Response 30Hz ~ 15kHz (± 3dB)
FM Signal to noise ratio (Mono) 64dB
FM Stereo Separation (1kHz) 40dB
MW range: 531kHz - 1611kHz (9kHz step) Yes
MW Usable Sensitivity 28.2μV
LW range: 153kHz - 279kHz (9kHz step) Yes
LW Usable Sensitivity 50μV
Codec Specs
MP3 Format MPEG 1/2 Audio Layer 3-Files
WMA Format Compliant with Windows Media Audio
AAC Format AAC-LC “.aac” files only
WAV Format RIFF waveform Audio Format (only for LinearPCM)
FLAC Format FLAC files (up to 48kHz/24bit)
CD Specifications
Laser Diode GaAIAs
Digital Filter(D/A) 8 Times Over Sampling
Digital/Analogue Converter 24 Bit
Spindle Speed 500 ~ 200rpm (CLV: 1 times)
Wow & Flutter Below Measurable Limit
Frequency Response 20Hz ~ 20kHz (±1dB)
Total Harmonic Distortion 0.01% (1kHz)
Signal to Noise Ratio 105dB (1kHz)
Dynamic Range 90dB
Channel Separation 85dB
MP3 Decoder Compliant with MPEG-1/2 Audio Layer-3
WMA Decoder Compliant with Windows Media Audio
AAC Decoder AAC-LC.aac Files
USB Specifications
USB Version compatibility USB 1.1/2.0 full speed
File System FAT 32/16/12
Maximum Supply current 1500mA
D/A Converter 24bit
MP3 Decode Compliant with MPEG-1/2 Audio Layer-3
WMA Decode Compliant with Windows Media Audio
AAC Decode AAC-LC aac Files only
WAV Decode Linear - PCM Files
flac Decode FLAC files up to 48kHz/24bit
Audio Specifications
Maximum Power 50W x 4
Output Power (DIN45324,+B=14.4v) 22W x 4
Preout Level 4000mV / 10kOhm,
Preout Impedance ≤ 600Ohm
Speaker Impedance 4Ohm ~ 8Ohm
AUX Frequency Response 20Hz ~ 20kHz (±1dB)
AUX Maximum Input Voltage 1000mV
AUX Input Impedance 30kOhm
Graphical Equalizer 13-Band
G. EQ. Frequency (Hz) 62,5/100/160/250/400/630/1k/1k6/2k5/4k/6k3/10k/16k
G. EQ. Gain (dB) +/- 9dB
Subwoofer Level (dB) -15 dB to +15dB
Bluetooth specifications
Technology Bluetooth V3.0
Frequency 2.402 - 2.48 GHz
Output power +4dBm(max), 0dBm (AVE) power class 2
Maximum range Line of sight approx. 10 meter
Handsfree profile (HFP) Yes, V1.6
Serial port profile (SPP) Yes
Advanced audio distribution profile (A2DP) Yes
Audio Codec SBC/AAC
Audio/Video remote control profile (AVRCP) Yes, V1,5
Phonebook access profile (PBAP) Yes
Accessories
Release keys 2 pieces
Escutcheon Yes
Installation Sleeve Yes
DC cord (Mitsumi to ISO) 15 cm
Handsfree Microphone with 2.5 m cable
General Specifications
Operating voltage 14.4V (10.5 ~ 16V Allowable)
Maximum Current Consumption 10A
Dimensions (WxHxD) 182 x 53 x 158mm
Weight, inclu. sleeve & escutcheon 1.3 kg
Operation Temperature Range -10°C ~ 60°C
Tip Echipament Player Digital
Pentru Boxe:

- Pentru performante optime este necesara pozitionarea boxelor la o distanta de minim 30-40cm de peretele din spate pentru boxele cu bass-reflex in spate, pentru cele cu bass-reflex in fata, recomandam pozitionarea la o distanta de 10-20cm fata de peretele din spate.

- Boxele vor ajunge sa functioneze in parametrii recomandati de producator, dupa minim 50 de ore (ideal 100 ore) de functionare la volum mediu. In aceasta perioada de timp, de “rodaj a boxelor”, sunetul va fi la inceput ceva mai artificial, bass-ul nu va fi inca controlat, inaltele rigide iar vocile usor retinute, pe masura ce boxele vor functiona, veti remarca cum bas-ul devine mai controlat, mai prezent si mai voluminos, vocile si sunetele medii devin naturale si mai echilibrate, iar inaltele devin rafinate si detaliate. Exista boxe care necesita un „rodaj” mai amplu de minim 300 de ore mai ales in cazul celor care au difuzoare de kevlar, carbon sau alte materiale de acest tip. Boxele care se „rodeaza” cel mai repede sunt cele care au difuzoare de celuloza.

Pentru Amplificatoare, DAC-uri, Preamplificatoare, Receiver Stereo & Home Cinema, Surse digitale audio-video:

- Pentru performante optime este necesar „rodarea” echipamentului, In functie de complexitatea componentelor din aparatul dumneavoastra acesta poate dura intre 30-200 ore.

- Rodajul se face la volum minim, fiind astfel suficient faptul ca acesta este alimentat corect conform manualului de utilizare la 220-230 Volti si trece semnal audio sau video dupa caz prin el.

- Echipamentul supus „rodajului” va ajunge sa functioneze in parametrii recomandati de producator, dupa perioada mai sus mentionata. In aceasta perioada de timp, de “rodaj”, sunetul va fi la inceput ceva mai artificial, bass-ul nu va fi inca controlat, inaltele rigide iar vocile usor retinute, pe masura ce echipamentul va functiona, veti remarca cum bas-ul devine mai controlat, mai prezent si mai voluminos, vocile si sunetele medii devin naturale si mai echilibrate, iar inaltele devin rafinate si detaliate.

Pentru cabluri:

- Pentru performante optime este necesara „rodarea” cablurilor, In functie de complexitatea conductorului folosit, cat si geometriei acestuia, „rodajul” poate dura intre 30-100 ore.

- Rodajul se face la volum minim, fiind astfel suficient faptul ca va trece semnal audio sau video dupa caz prin el.

- Cablul supus „rodajului” va ajunge sa functioneze in parametrii recomandati de producator, dupa perioada mai sus mentionata. In aceasta perioada de timp, de “rodaj”, sunetul va fi la inceput ceva mai artificial, pe masura ce cablul va functiona, veti remarca cum bas-ul devine mai controlat, mai prezent si mai voluminos, vocile si sunetele medii devin naturale si mai echilibrate, iar inaltele devin rafinate si detaliate.

Pentru detalii privind aceste aspecte de rodaj si nu numai, va rugam sa ne consultati!

Nu sunt recenzii pentru Player Auto Kenwood KDC-X5100BT. Fii primul care scrie una!


Spune-ti parerea

Trebuie sa fii autentificat pentru a comenta!

Produse similare