Difuzor Dayton Audio UM10-22

  • Difuzor Dayton Audio UM10-22
  • Difuzor Dayton Audio UM10-22
  • Difuzor Dayton Audio UM10-22
Echipa AVmall incearca sa mentina acuratetea informatiilor din acesta prezentare. Cu toate acestea, in anumite cazuri, pot aparea mici inadvertente pentru a caror semnalare va suntem recunoscatori. Ne poti contacta oricand pentru a clarifica eventuale nelamuriri. Nu uita sa mentionezi in corespondenta ta numele exact al produsul. Fotografia produsului Difuzor Dayton Audio UM10-22 are caracter informativ si poate sa difere de produsul real sau sa contina accesorii neincluse in pachetul standard al produsului. Specificatiile tehnice pot contine erori de operare si pot fi schimbate fara instiintare prealabila de catre producator, neconstituind obligativitate contractuala.
1215,00 RON / Bucata
Disponibilitate: In stoc furnizor

Ai gasit mai ieftin? Suna pentru cea mai buna oferta!

Oferta personalizata si reducere pentru 2 sau mai multe produse. Suna acum si afla!

Cantitate:
+
De la: 202.5 lei / luna
Livrarea este gratuita in Bucuresti si provincie (daca comanda depaseste 299 ron), timpul de livrare este de 24-48 de ore, in cazul in care s-a facut confirmarea livrarii de catre AVmall.

Dayton Audio's Ultimax Series DVC subwoofers are purpose-built to move air and create clean, articulate, fast bass. Experience the apex of subwoofer design.

Highlights

· Dual 2 ohm, 2-layer copper voice coils

· Large vented pole piece and under-spider venting

· 500 watts RMS power handling

· Black anodized aluminum former and black pole improves heat dissipation

· Thick, one-piece Nomex honeycomb covered cone with woven heavy-duty glass-fiber

· Tall-boy rubber surround for extra-long linear excursion without reducing cone surface area

· Dual linear stiffness spiders limit distortion and rocking modes

Product Details

Dayton Audio UM10-22 10 Ultimax DVC Subwoofer 2 ohms Per Coil

If you want outrageous amounts of bass, you gotta move some air

The Ultimax Series of dual voice coil subwoofers, from Dayton Audio, are not for the faint of heart. Built using the latest in subwoofer technology, Ultimax subwoofers are the pinnacle of low frequency driver design. An Ultimax subwoofer tests the strength of your foundation with fast, articulate, gut-wrenching bass.

The versatility you need for mobile, home, or pro subwoofer excellence

Dual 2 ohm voice coils allow for stereo 2 ohm and mono 1 ohm wiring configurations when connecting to high current car audio and professional audio amplifiers to extract maximum power. For home audio applications, simply wire the voice coils in series for a benign 4 ohm load for greater amplifier compatibility.

Built to produce massive low frequency output and keep on doing it

To improve power handling, increase thermal management, and reduce power compression, Dayton Audio designed the Ultimax Series with large black anodized formers and vented pole pieces, under-spider ventilation, and two-layer copper voice coils.

Over 1-1/2 of travel (3/4 Xmax) is kept completely linear through the use of dual spiders that also limit distortion and rocking modes. Tall-boy rubber surrounds with integrated gaskets maintain driver surface area during extreme excursion moments. Thick, one-piece Nomex honeycomb covered cones are covered with woven, heavy-duty glass fibers creating ultra-still cones that resist deformation.

A strong motor takes you to wherever you want to be

A large copper sleeve and copper pole cap in the motor reduce energy storage from inductance, with the side benefit of lowering distortion for faster response. Large dual-stacked, high-energy magnets handle the heavy lifting and bring Qts down to a level where Ultimax subwoofers can be used in vented or sealed cabinets and enclosures.



Cabinet recommendations:

• Sealed 0.63 cubic ft. (net internal), f3 of 45 Hz with a 0.707 Qtc alignment

• Vented 1.75 cubic ft. (net internal, not including driver or port volume) tuned to 25 Hz with a 10 wide by 1 high slot port that is 24 long, which yields an f3 of 23 Hz

Note: All parameters derived with voice coils wired in series.

Specificatii Difuzor Dayton Audio UM10-22

Specificatii PRODUCT SPECIFICATIONS

Nominal Diameter

10

Power Handling (RMS)

500 Watts

Power Handling (max)

1000 Watts

Impedance

2+2 ohms

Frequency Response

25 to 1,500 Hz

Sensitivity

84.8 dB 2.83V/1m

Voice Coil Diameter

2.5



THIELE-SMALL PARAMETERS

Resonant Frequency (Fs)

26.9 Hz

DC Resistance (Re)

3.2 ohms

Voice Coil Inductance (Le)

1.28 mH

Mechanical Q (Qms)

3.08

Electromagnetic Q (Qes)

0.59

Total Q (Qts)

0.49

Compliance Equivalent Volume (Vas)

0.83 ft.³

Mechanical Compliance of Suspension (Cms)

0.15 mm/N

BL Product (BL)

14.5 Tm

Diaphragm Mass Inc. Airload (Mms)

227g

Maximum Linear Excursion (Xmax)

19 mm

Surface Area of Cone (Sd)

327.8 cm²



MATERIALS OF CONSTRUCTION

Cone Material

Nomex / Glass Fiber

Surround Material

Rubber

Voice Coil Wire Material

Copper

Voice Coil Former

Aluminum

Basket / Frame Material

Cast Aluminum

Magnet Material

Ferrite



MOUNTING INFORMATION

Overall Outside Diameter

10.77

Baffle Cutout Diameter

9.32

Depth

5.7

Bolt Circle Diameter

10.14

# Mounting Holes

8



OPTIMUM CABINET SIZE (DETERMINED USING BASSBOX 6 PRO HIGH FIDELITY SUGGESTION)

Sealed Volume

0.585 ft.³

Sealed F3

45 Hz

Vented Volume

1.55 ft.³

Vented F3

22 Hz
Tip Echipament Subwoofer
Diametru 10.0 inch / 25.0 cm

Dayton Audio - Excelenta pe bani putini

Exista multe marci care reusesc sa propuna pietei produse de buna calitate la preturi foarte accesibile, dar raportul bani/valoare la care ajung inginerii de la Dayton Audio depaseste imaginabilul. Cu peste 20 de ani de experienta in domeniu, Dayton Audio a devenit unul dintre varfurile de lance cu care Hi-Fi-ul ieftin iese la atac in eternal disputa cu granzii industriei.

Principiul de la care nu se face niciun fel de rabat este acela de a respecta cele trei elemente considerate esentiale: inovatie, valoare, calitate. Misiunea propusa este aceea de a calibra la milimetru raportul dintre tehnologie si arta, pentru obtinerea unor rezultate sonore imbatabile chiar si pentru clase de pret mult superioare.

Cu o gama larga de componente audio in portofoliu (boxe, amplificatoare, sisteme multicanal, subwoofere, sisteme de prindere etc), compania din Springboro, Ohio, este considerata una dintre cele mai bune pe segmentul de boxe, multe dintre seriile purtand marca Dayton Audio primind notele maxime atat din partea jurnalistilor, cat si a utilizatorilor. Dupa cum spune chiar sloganul companiei - awesomely affordable - excelenta pe bani putini. 

Nu sunt recenzii pentru Difuzor Dayton Audio UM10-22. Fii primul care scrie una!


Spune-ti parerea

Trebuie sa fii autentificat pentru a comenta!

Produse similare