Acest produs se aduce la comanda in termen 3-6 zile. Va rugam sa ne contactati pentru detalii.
Ai gasit mai ieftin? Suna pentru cea mai buna oferta!
Oferta personalizata si reducere pentru 2 sau mai multe produse. Suna acum si afla!
The Dynaudio EMIT 50, the big sister of the EMIT 30, is a high-end 3-way floorstanding speaker with a perfect audiophile tuning and technology. This model is ideal for medium to large rooms. They are equipped with three MSP (Magnesium Silicate polymer) drivers. Two 18cm woofers and one 15cm midrange to fill large spaces. In addition, a Cerotar tweeter of 28mm specific to the brand takes care of the treble. These speakers are thus able to reproduce a powerful, rich, dynamic and transparent sound. This pair of speakers offers high-end performance in both Hi-Fi and home theater configurations. Whether used as a stand-alone stereo pair or in a 5.1-channel (or higher) home theater configuration, its performance and power will impress you.
The EMIT 50 is equipped with not one but two dual-magnet MSP woofers for bass. The dual magnet MSP material gives it greater control of movement and higher sensitivity. The diaphragm is bonded directly to the voice coil for smooth, precise control. The result is a strong power handling and deep, clean bass that allows for low frequency reproduction up to 28Hz.
The EMIT 50 is equipped with a dual magnet MSP driver exclusively dedicated to the midrange. Its design is similar to the woofers also present on the speaker and provides the same precise and fluid control of the midrange.
In short, the MSP speakers of the Dynaudio EMIT 50 provide a wide frequency response (28Hz - 35Khz) while maintaining a nice clarity on the midrange, all without distortion even at high volume.
The Cerotar tweeter of the EMIT 50, like the EMIT 30, has a diameter of 28mm. This soft dome model is made of fabric and a DSP (Dynaudio Secret Recipe) coating. This speaker allows a detailed and powerful reproduction of high frequencies without generating hearing fatigue during long listening sessions. In addition, the presence of the Hexis system optimizing the air flow allows to maintain a pure sound by limiting the distortions and the undesirable resonances while giving more details to the sound.
Dynaudio has chosen to use three distinct circuits to retranscribe the incoming sound signal. A first order crossover for the tweeter, a second order crossover for the midrange and a fourth order crossover for the woofers. This greatly improves the performance of the EMIT 50 in terms of sound quality. In addition, this feature allows you to combine this model with other speakers in the range while maintaining optimal tonal coherence. The crossover frequencies are located at 540Hz and 4400Hz.
On their rear face, the Dynaudio EMIT 50 have a screw terminal allowing the speakers to receive 4mm banana plugs, forks or stripped cables of strong section.
These Dynaudio speakers benefit from a Bass-Reflex system with two double flared vents. The chassis of these speakers is made of 18mm thick MDF. Each speaker comes with a magnetic grille to protect the drivers. Numerous internal reinforcements are also present inside the chassis, as well as a damping coating to eliminate interference and vibrations.
Important: Conținutul acestei descrieri de produs a fost tradus automat și poate conține erori atât de vocabular, cât și de sintaxă și gramatică.
Specificatii | Product type Column speakers Number of ways 3 Bass Reflex Facing backwards Bass speaker diameter 2* Ø180mm Medium speaker diameter Ø150mm Tweeter diameter Ø28mm Frequency response 28Hz - 35kHz (±6dB) Impedance 4Ω Sensitivity 86dB (2.83V/1m) Crossover frequency 540Hz 4400Hz Crossover topology Tweeter: 1st order filter Medium: 2nd order filter Woofer: 4th order filter Power rating (IEC) 240W GENERAL Dimensions (W*D*H) 205*311.5*1140mm Weight 25.96kg / unit |
- Pentru performante optime este necesara pozitionarea boxelor la o distanta de minim 30-40cm de peretele din spate pentru boxele cu bass-reflex in spate, pentru cele cu bass-reflex in fata, recomandam pozitionarea la o distanta de 10-20cm fata de peretele din spate.
- Boxele vor ajunge sa functioneze in parametrii recomandati de producator, dupa minim 50 de ore (ideal 100 ore) de functionare la volum mediu. In aceasta perioada de timp, de “rodaj a boxelor”, sunetul va fi la inceput ceva mai artificial, bass-ul nu va fi inca controlat, inaltele rigide iar vocile usor retinute, pe masura ce boxele vor functiona, veti remarca cum bas-ul devine mai controlat, mai prezent si mai voluminos, vocile si sunetele medii devin naturale si mai echilibrate, iar inaltele devin rafinate si detaliate. Exista boxe care necesita un „rodaj” mai amplu de minim 300 de ore mai ales in cazul celor care au difuzoare de kevlar, carbon sau alte materiale de acest tip. Boxele care se „rodeaza” cel mai repede sunt cele care au difuzoare de celuloza.
- Pentru performante optime este necesar „rodarea” echipamentului, In functie de complexitatea componentelor din aparatul dumneavoastra acesta poate dura intre 30-200 ore.
- Rodajul se face la volum minim, fiind astfel suficient faptul ca acesta este alimentat corect conform manualului de utilizare la 220-230 Volti si trece semnal audio sau video dupa caz prin el.
- Echipamentul supus „rodajului” va ajunge sa functioneze in parametrii recomandati de producator, dupa perioada mai sus mentionata. In aceasta perioada de timp, de “rodaj”, sunetul va fi la inceput ceva mai artificial, bass-ul nu va fi inca controlat, inaltele rigide iar vocile usor retinute, pe masura ce echipamentul va functiona, veti remarca cum bas-ul devine mai controlat, mai prezent si mai voluminos, vocile si sunetele medii devin naturale si mai echilibrate, iar inaltele devin rafinate si detaliate.
- Pentru performante optime este necesara „rodarea” cablurilor, In functie de complexitatea conductorului folosit, cat si geometriei acestuia, „rodajul” poate dura intre 30-100 ore.
- Rodajul se face la volum minim, fiind astfel suficient faptul ca va trece semnal audio sau video dupa caz prin el.
- Cablul supus „rodajului” va ajunge sa functioneze in parametrii recomandati de producator, dupa perioada mai sus mentionata. In aceasta perioada de timp, de “rodaj”, sunetul va fi la inceput ceva mai artificial, pe masura ce cablul va functiona, veti remarca cum bas-ul devine mai controlat, mai prezent si mai voluminos, vocile si sunetele medii devin naturale si mai echilibrate, iar inaltele devin rafinate si detaliate.
Pentru detalii privind aceste aspecte de rodaj si nu numai, va rugam sa ne consultati!
Acest site foloseste cookie-uri. Navigand in continuare, iti exprimi acordul pentru utilizarea acestora, in conformitate cu Politica De Protecţie a Datelor cu Caracter Personal.. Citeste mai mult despre cookie.
Setari date personale