INFO STOC Solicita stoc sau informatii produs!
Livrarea se face in limita stocului disponibil
Asigurati-va de disponibilitatea produsului ce urmeaza sa il comandati, puteti face acest lucru telefonic sau pe email
Boxe de Podea Unitra ZGZ-801 Negru
Echipa AVmall incearca sa mentina acuratetea informatiilor din acesta prezentare. Cu toate acestea, in anumite cazuri, pot aparea mici inadvertente pentru a caror semnalare va suntem recunoscatori. Ne poti contacta oricand pentru a clarifica eventuale nelamuriri. Nu uita sa mentionezi in corespondenta ta numele exact al produsul. Fotografia produsului Boxe de Podea Unitra ZGZ-801 Negru are caracter informativ si poate sa difere de produsul real sau sa contina accesorii neincluse in pachetul standard al produsului. Specificatiile tehnice pot contine erori de operare si pot fi schimbate fara instiintare prealabila de catre producator, neconstituind obligativitate contractuala.
29.490,00 RON / Pereche
Acest produs se aduce la comanda in termen 3-6 zile. Va rugam sa ne contactati pentru detalii.
Disponibilitate: La comanda
Ai gasit mai ieftin? Suna pentru cea mai buna oferta!
Oferta personalizata si reducere pentru 2 sau mai multe produse. Suna acum si afla!
Cantitate:
−
+
De la: 4915 lei / luna
Livrarea este gratuita in Bucuresti si provincie (daca comanda depaseste 500 ron), timpul de livrare este de 24-48 de ore, in cazul in care s-a facut confirmarea livrarii de catre AVmall.
The ZGZ-801 reference loudspeaker system features a closed enclosure design with a volume of 75 liters. It features custom low and midrange drivers with aluminum baskets of increased rigidity with a lightweight cellulose diaphragm, operating in a 3-way system using a crossover of advanced design.
The set is characterized by high efficiency, dynamics, effectiveness and smooth impedance characteristics. It blends perfectly with any amplifier.
Unique design
The ZGZ-801 is a rare closed-cabinet design with custom drivers with a configuration inspired by the d'Appolito layout. The set is a 3-way system using a crossover of advanced design.
The result is a loudspeaker system with high dynamics, efficiency and mild impedance characteristics.
All this means that these gentle giants will also play great with tube amplifiers.
Closed-case design
We used a fully enclosed solid cabinet with an internal volume of 75 liters and a 3-way audio path system with dual woofers. This design allows for a fast impulse response, so we can enjoy clear and unstretched sounds, which is especially noticeable at low frequencies.
The closed design also has the advantage of a gently sloping bass response, making the bass more natural and pleasing to the ear. The enclosure used also gives a wide range of maneuverability in terms of positioning the set in the listening room due to the absence of characteristic coloration in the bass section, often heard in the most popular designs.Thanks to the high dynamic range, our set will play extremely clearly both at high volume and in quiet evening playback.
High efficiency and exceptional vocals
The 91 dB efficiency (measured in an anechoic chamber) resulting from the use of two drivers in the lowest band and high-efficiency drivers in the mid and high bands gives it the ability to work effectively with a wide range of amplifiers, both solid-state and tube.
The midrange driver used operates at high power handling and has a built-in phase equalizer. The division frequencies have been selected so that they are not in the range most sensitive to the human ear. This allows us to enjoy a very clear and faithful reproduction of vocals.
Smooth impedance characteristics
Smooth impedance characteristics with no local low extremes, making it possible to connect to amplifiers sensitive to changes in load impedance.
Hi-End Crossover
Advanced passive crossover with a 3rd order tweeter, midrange and 2nd order woofer path design with Zobel circuit and band-pass filter. We used top-notch components, including air coils and metallized polypropylene capacitors, which enhance the linearity of the frequency response with no visible divide in the bandwidth.
Transducers made especially for us
Custom low and midrange drivers with aluminum baskets of increased rigidity with a lightweight cellulose diaphragm. All transducers were made in Poland and Norway according to Unitra engineers' instructions. We used two 8-inch woofers with lightweight cellulose diaphragm and aluminum basket. An 8-inch driver with a woven polypropylene diaphragm and phase equalizer is responsible for the midrange, and the whole is completed by a 27mm textile dome
Double box design
The design of the enclosure is based on an uncommon on the market box-in-box arrangement for greater rigidity of the structure. The resulting weight of the set of more than 70 kg has a significant impact on the reduction of vibrations of the enclosure walls and parasitic resonances generated as a result, which positively translates into sound quality.
Finishing with natural materials
The enclosures are finished with natural wood veneer made from selected leaves and hand oiled. In addition to the standard black grilles, we also have more classic ones, for which we used Polish linen.
Important: Conținutul acestei descrieri de produs a fost tradus automat și poate conține erori atât de vocabular, cât și de sintaxă și gramatică.
Specificatii Boxe de Podea Unitra ZGZ-801 Negru
| Specificatii | Frequency Response 55 Hz to 20 kHz (±3 dB) Sensitivity 91 dB Impedance 6 Ω Power Rating 190 W RMS System 3-way Crossover Frequencies 700 Hz / 2,8 kHz Enclosure Type Sealed Connector Type Dual (bi-wire / bi-amp) Woofer 2 × 8 paper cone Midrange 8 polypropylene cone Tweeter 27 mm textile dome Dimensions 280 × 328 × 1188 mm (11 × 12.9 × 46.8 in) Weight 74 kg (163 lbs) Grille Black acoustic fabric or natural linen Finishes Real wood veneer: Black Ash or American Walnut Material Two layers of MDF (total thickness: 20 mm / 0.8 in) |
Pentru Boxe:
- Pentru performante optime este necesara pozitionarea boxelor la o distanta de minim 30-40cm de peretele din spate pentru boxele cu bass-reflex in spate, pentru cele cu bass-reflex in fata, recomandam pozitionarea la o distanta de 10-20cm fata de peretele din spate.
- Boxele vor ajunge sa functioneze in parametrii recomandati de producator, dupa minim 50 de ore (ideal 100 ore) de functionare la volum mediu. In aceasta perioada de timp, de “rodaj a boxelor”, sunetul va fi la inceput ceva mai artificial, bass-ul nu va fi inca controlat, inaltele rigide iar vocile usor retinute, pe masura ce boxele vor functiona, veti remarca cum bas-ul devine mai controlat, mai prezent si mai voluminos, vocile si sunetele medii devin naturale si mai echilibrate, iar inaltele devin rafinate si detaliate. Exista boxe care necesita un „rodaj” mai amplu de minim 300 de ore mai ales in cazul celor care au difuzoare de kevlar, carbon sau alte materiale de acest tip. Boxele care se „rodeaza” cel mai repede sunt cele care au difuzoare de celuloza.
Pentru Amplificatoare, DAC-uri, Preamplificatoare, Receiver Stereo & Home Cinema, Surse digitale audio-video:
- Pentru performante optime este necesar „rodarea” echipamentului, In functie de complexitatea componentelor din aparatul dumneavoastra acesta poate dura intre 30-200 ore.
- Rodajul se face la volum minim, fiind astfel suficient faptul ca acesta este alimentat corect conform manualului de utilizare la 220-230 Volti si trece semnal audio sau video dupa caz prin el.
- Echipamentul supus „rodajului” va ajunge sa functioneze in parametrii recomandati de producator, dupa perioada mai sus mentionata. In aceasta perioada de timp, de “rodaj”, sunetul va fi la inceput ceva mai artificial, bass-ul nu va fi inca controlat, inaltele rigide iar vocile usor retinute, pe masura ce echipamentul va functiona, veti remarca cum bas-ul devine mai controlat, mai prezent si mai voluminos, vocile si sunetele medii devin naturale si mai echilibrate, iar inaltele devin rafinate si detaliate.
Pentru cabluri:
- Pentru performante optime este necesara „rodarea” cablurilor, In functie de complexitatea conductorului folosit, cat si geometriei acestuia, „rodajul” poate dura intre 30-100 ore.
- Rodajul se face la volum minim, fiind astfel suficient faptul ca va trece semnal audio sau video dupa caz prin el.
- Cablul supus „rodajului” va ajunge sa functioneze in parametrii recomandati de producator, dupa perioada mai sus mentionata. In aceasta perioada de timp, de “rodaj”, sunetul va fi la inceput ceva mai artificial, pe masura ce cablul va functiona, veti remarca cum bas-ul devine mai controlat, mai prezent si mai voluminos, vocile si sunetele medii devin naturale si mai echilibrate, iar inaltele devin rafinate si detaliate.
Pentru detalii privind aceste aspecte de rodaj si nu numai, va rugam sa ne consultati!
