Acest produs se aduce la comanda in termen 3-6 zile. Va rugam sa ne contactati pentru detalii.
Ai gasit mai ieftin? Suna pentru cea mai buna oferta!
Oferta personalizata si reducere pentru 2 sau mai multe produse. Suna acum si afla!
The Audio-GD Master 9P is an excellent fully balanced headphone amplifier and combo amplifier, featuring the newly developed ACSS design, which provides a sound that is as accurate and transparent with XLR as with ACSS. It also benefits from an optimized power supply to provide an extremely clean and stable electrical signal to all audio circuits.
The amplifier stage of the Master 9P has a unique current gain stage (ACSS) for the shortest possible signal path and a particularly neutral and faithful sound reproduction. This ACSS amplifier has a very low distortion level and is soldered directly to the main PCB. The gain and preamplifier stages here operate in Class A. The output transistors operate with a high rest current. The special design of this stage avoids switching distortion.
The ACSS used in the Master 9P architecture is a feedback-free technology using discrete amplifiers. The combination of ACSS and a feedback-free circuitry allows for beautiful dynamics, detail and sonic neutrality, while ensuring low distortion and high linearity. The ACSS stage uses four groups of high quality Class A PSUs. This parallel connection provides a high input impedance to prevent power supply pulses from affecting the gain stages.
The Master 9P uses Linear Fidelity technology on its output stages. These have no feedback but maintain a very low level of distortion and offer excellent linear performance.
The use of high power components combined with a robust power supply ensures a high current output, allowing the Master-9P to accompany demanding loudspeakers. The Master 9P uses four channels of feedback-free output stages consisting of eight ON Semiconductor transistors, each with a power handling capacity of 230W/15A. The whole set reaches a capacity of 100000µF and two transformers are used with a power of 600W.
In order to limit the impact of different output impedances depending on the DAC used, the Master 9P uses four groups of Class A FET cascode buffers. All input signals pass through these FET buffers to achieve a low output impedance.
The Master 9P's volume control system acts at the input stage of the analog amplifier via a potentiometer allowing signal attenuation through relays and resistors. Here the volume control uses a variable passive I/V conversion at the output of the ACSS amplifier and does not degrade the signal quality.
The Master 9P features complete separation of the left and right channels of the amplifier, power supply and transformer. It also uses a heavy aluminum alloy chassis to prevent transformer eddy currents from interfering with the PCB.
Important: Conținutul acestei descrieri de produs a fost tradus automat și poate conține erori atât de vocabular, cât și de sintaxă și gramatică.
Specificatii | Product type Amplifier Amplifier type Class A Inputs 2x XLR 2x RCA 1x ACSS Outputs Speaker terminals 1x Stereo XLR headphone output 1x XLR 4 pins headphone output 1x Jack 6.35mm headphone output SNR > 110dB Gain High gain : 34dB Low gain : 20dB Amplifier output power 2x100W @ 4Ω 2x70W @ 8Ω Headphone output power 2x35W @ 15Ω 2x20W @ 25Ω 2x14W @ 40Ω 2x6W @ 100Ω 2x2W @ 300Ω 2x1W @ 600Ω Input sensitivity XLR : 0.55Vrms ACSS : 2mArms Input impedance RCA : 47kΩ XLR : 94kΩ ACSS : < 10Ω THD+N < 0.05% @ 20W, 8Ω, 1kHz < 0.002% @ 20W, 8Ω, 20kHz, 2Vrms, XLR input < 0.055% @ 60W, 8Ω, 1kHz < 0.005% @ 60W, 8Ω, 20kHz, 2Vrms, XLR input GENERAL Supply voltage 220-240VAC 50/60Hz Consumption 50WW Dimensions 430 x 430 x 93mm Weight Approx. 16kg Color Black Package 1x Audio-GD Master-9PN 1x Power cable |
- Pentru performante optime este necesara pozitionarea boxelor la o distanta de minim 30-40cm de peretele din spate pentru boxele cu bass-reflex in spate, pentru cele cu bass-reflex in fata, recomandam pozitionarea la o distanta de 10-20cm fata de peretele din spate.
- Boxele vor ajunge sa functioneze in parametrii recomandati de producator, dupa minim 50 de ore (ideal 100 ore) de functionare la volum mediu. In aceasta perioada de timp, de “rodaj a boxelor”, sunetul va fi la inceput ceva mai artificial, bass-ul nu va fi inca controlat, inaltele rigide iar vocile usor retinute, pe masura ce boxele vor functiona, veti remarca cum bas-ul devine mai controlat, mai prezent si mai voluminos, vocile si sunetele medii devin naturale si mai echilibrate, iar inaltele devin rafinate si detaliate. Exista boxe care necesita un „rodaj” mai amplu de minim 300 de ore mai ales in cazul celor care au difuzoare de kevlar, carbon sau alte materiale de acest tip. Boxele care se „rodeaza” cel mai repede sunt cele care au difuzoare de celuloza.
- Pentru performante optime este necesar „rodarea” echipamentului, In functie de complexitatea componentelor din aparatul dumneavoastra acesta poate dura intre 30-200 ore.
- Rodajul se face la volum minim, fiind astfel suficient faptul ca acesta este alimentat corect conform manualului de utilizare la 220-230 Volti si trece semnal audio sau video dupa caz prin el.
- Echipamentul supus „rodajului” va ajunge sa functioneze in parametrii recomandati de producator, dupa perioada mai sus mentionata. In aceasta perioada de timp, de “rodaj”, sunetul va fi la inceput ceva mai artificial, bass-ul nu va fi inca controlat, inaltele rigide iar vocile usor retinute, pe masura ce echipamentul va functiona, veti remarca cum bas-ul devine mai controlat, mai prezent si mai voluminos, vocile si sunetele medii devin naturale si mai echilibrate, iar inaltele devin rafinate si detaliate.
- Pentru performante optime este necesara „rodarea” cablurilor, In functie de complexitatea conductorului folosit, cat si geometriei acestuia, „rodajul” poate dura intre 30-100 ore.
- Rodajul se face la volum minim, fiind astfel suficient faptul ca va trece semnal audio sau video dupa caz prin el.
- Cablul supus „rodajului” va ajunge sa functioneze in parametrii recomandati de producator, dupa perioada mai sus mentionata. In aceasta perioada de timp, de “rodaj”, sunetul va fi la inceput ceva mai artificial, pe masura ce cablul va functiona, veti remarca cum bas-ul devine mai controlat, mai prezent si mai voluminos, vocile si sunetele medii devin naturale si mai echilibrate, iar inaltele devin rafinate si detaliate.
Pentru detalii privind aceste aspecte de rodaj si nu numai, va rugam sa ne consultati!
Acest site foloseste cookie-uri. Navigand in continuare, iti exprimi acordul pentru utilizarea acestora, in conformitate cu Politica De Protecţie a Datelor cu Caracter Personal.. Citeste mai mult despre cookie.
Setari date personale