Amplificator Integrat Dayton Audio APA150

  • Amplificator Integrat Dayton Audio APA150
  • Amplificator Integrat Dayton Audio APA150
  • Amplificator Integrat Dayton Audio APA150
Echipa AVmall incearca sa mentina acuratetea informatiilor din acesta prezentare. Cu toate acestea, in anumite cazuri, pot aparea mici inadvertente pentru a caror semnalare va suntem recunoscatori. Ne poti contacta oricand pentru a clarifica eventuale nelamuriri. Nu uita sa mentionezi in corespondenta ta numele exact al produsul. Fotografia produsului Amplificator Integrat Dayton Audio APA150 are caracter informativ si poate sa difere de produsul real sau sa contina accesorii neincluse in pachetul standard al produsului. Specificatiile tehnice pot contine erori de operare si pot fi schimbate fara instiintare prealabila de catre producator, neconstituind obligativitate contractuala.
1199,00 RON / Bucata
STOC: In stoc furnizor

Ai gasit mai ieftin? Suna pentru cea mai buna oferta!

Oferta personalizata si reducere pentru 2 sau mai multe produse. Suna acum si afla!

Cantitate:
+
De la: 199.83 lei / luna
Livrarea este gratuita in Bucuresti si provincie (daca comanda depaseste 299 ron), timpul de livrare este de 24-48 de ore, in cazul in care s-a facut confirmarea livrarii de catre AVmall.

Dayton Audio's versatile APA150 power amplifier delivers 75 watts per channel in its full-range stereo configuration, or 150 watts into 8 ohms when in bridge-mono mode. A built-in, switchable low-pass filter also makes the APA150 a great subwoofer amp!

Highlights

  • Sleek modern design looks good and sounds great
  • Virtually noise-free fan operation for near field applications
  • High current, discrete output transistors that run cool and quiet
  • Adjustable 50-150 Hz low pass crossover gives you the room control you need
  • Gold-plated 5-way binding posts that accept up to 8 AWG wire

Product details

Dayton Audio APA150 150W Power Amplifier

THE ONLY AMPLIFIER(S) YOU'LL EVER NEED!

Amplifiers today need to be multi-faceted to keep up with the task at hand, and versatility is the foundation upon which the Dayton Audio APA150 is built. When configured in stereo mode, amplification is provided to a pair of speakers for stereo or surround playback. Select bridge-mono mode and the APA150 is ready to power a center channel speaker, or a subwoofer/tactile transducer when used with the on-board low pass filter. Full-range line-level outputs allow for daisy chaining amplifiers for a multi-room whole house audio system or for bi-amp applications. The APA150's smaller chassis consumes less space than conventional amplifiers, making placement options virtually limitless.

BIG-AMP FEATURES PACKED INTO A SMALL-AMP CHASSIS

Key features of the APA150 include high current, discrete power transistors (used in premium amp designs), a hefty toroidal power supply transformer, low-noise forced air cooling, a fully adjustable—and defeatable—electronic 50-150 Hz low-pass filter (18 dB/octave), and complete protection against electrical shorting and thermal overload. Also included are auto-on/off, silent turn-off with no audible transient, gold plated RCA inputs/outputs, and 5-way binding posts.

CONNECTING THE APA150

-Connecting a line-level device

  1. Locate the RCA line-level output from your source device.
  2. Using RCA patch cables, connect the appropriate channel from the source output to the amplifier input.
  3. For a mono line-level signal, use the left-level input.

-Daisy-Chaining APA150s

  1. Connect the line-level input from source device as above.
  2. Connect the line-level output from first amplifier to line level input on the second amplifier.

-Using the APA150s Low-Pass Filter

  1. Ensure Low Pass-Flat switch is set to Low Pass.
  2. Connect line-level input from source device.
  3. Connect loud speakers as described below.
  4. Adjust crossover frequency until desired output is reached.

-Connecting Your Loudspeakers for Stereo Operation

  1. Ensure that the amplifier is powered down.
  2. Remove approximately 1/2 of the insulation from your speaker cables' positive and negative conductors.
  3. Loosen the speaker binding posts by turning the knobs counter-clockwise, exposing the wire insert hole.
  4. Observing polarity, insert the conductors into their appropriate binding posts and tighten the knobs down, securing the conductors in place.

-Connecting Your Loudspeakers for Bridged-Mono Operation

  1. Set the Mono-Stereo switch to Mono position.
  2. Remove approximately 1/2 of insulation from your speaker cables' positive and negative conductors.
  3. Loosen speaker binding posts by turning the knobs counter-clockwise, exposing the wire insert hole.
  4. Connect positive conductor to top left binding post.
  5. Connect negative conductor to bottom right binding post.

Specificatii Amplificator Integrat Dayton Audio APA150

Specificatii Features and Specifications: • Measured power output: 2 x 75 watts RMS (into 4 ohms @ less than 0.01% THD) • Signal-to-noise ratio: greater than 100 dB • Class A/B design topology • Input sensitivity: 1 V • Input impedance: 47k ohms • Auto-on sensitivity: 3 mV • Voltage requirement: 120/230 VAC, 60/50 Hz • Dimensions: 5.6 H x 5.7 W x 12.8 D.
Tip Echipament Solid State

Dayton Audio - Excelenta pe bani putini

Exista multe marci care reusesc sa propuna pietei produse de buna calitate la preturi foarte accesibile, dar raportul bani/valoare la care ajung inginerii de la Dayton Audio depaseste imaginabilul. Cu peste 20 de ani de experienta in domeniu, Dayton Audio a devenit unul dintre varfurile de lance cu care Hi-Fi-ul ieftin iese la atac in eternal disputa cu granzii industriei.

Principiul de la care nu se face niciun fel de rabat este acela de a respecta cele trei elemente considerate esentiale: inovatie, valoare, calitate. Misiunea propusa este aceea de a calibra la milimetru raportul dintre tehnologie si arta, pentru obtinerea unor rezultate sonore imbatabile chiar si pentru clase de pret mult superioare.

Cu o gama larga de componente audio in portofoliu (boxe, amplificatoare, sisteme multicanal, subwoofere, sisteme de prindere etc), compania din Springboro, Ohio, este considerata una dintre cele mai bune pe segmentul de boxe, multe dintre seriile purtand marca Dayton Audio primind notele maxime atat din partea jurnalistilor, cat si a utilizatorilor. Dupa cum spune chiar sloganul companiei - awesomely affordable - excelenta pe bani putini. 

Nu sunt recenzii pentru Amplificator Integrat Dayton Audio APA150. Fii primul care scrie una!


Spune-ti parerea

Trebuie sa fii autentificat pentru a comenta!

Produse similare