Hot

Boxa Definitive Technology UIW RSS II

3.199 lei / Bucata

Disponibilitate: La precomandă SKU: UIW RSS II Categorie:

    Descriere

    Definitive Reference Architectural Speakers are perfect for
    bringing spectacular-sounding, high-performance invisible home theater
    systems into every room in your house. The Reference Surround Speaker
    II (RSS II) is intended for use as an in-ceiling or in-wall rear or side
    surround speaker in custom installed home theater systems of the
    highest quality.

    The RSS II features a non-resonant sealed medite (a dense wood
    product) enclosure to deliver the tight, detailed bass and uncolored
    midrange of audiophile free-standing speakers in every installation. The
    performance of open back built-in speakers will vary depending on the
    nature of the wall/ceiling cavity behind the speaker. But Definitive
    Reference series speakers with integrated enclosures sound superb every
    time. Six rotating dogleg clamps and beefy wood screws make the RSS II
    easy to install in either new or existing construction and provide
    secure, non-resonant mounting for ultimate audiophile performance free
    of vibrations and buzzes.

    It features a curved angle bipolar array, which is perfect for movie
    and music surround use because it provides an ideal combination of
    direct sound for specificity and localization and ambient sound for
    enhanced spaciousness. The RSS II delivers uniquely enveloping surround
    performance totally immersing the listeners in a complete 360-degree
    soundstage. Walls seem to disappear and the listening room will be
    almost magically transformed into the location of the original sonic
    event. The curved aspect of the bipolar array further improves
    dispersion into the room. When installed in the ceiling, the direction
    in which the driver arrays face can be rotated 90 degrees in order to
    optimize the performance depending on the specific location of the
    speakers in relation to the seating area.

    Each RSS II bipolar surround speaker contains two complete 3-way
    full-range systems each with a 4-1/2 inch cast-basket bass/midrange
    driver pressure coupled to a 4-1/2 inch planar Bass Radiator and a 1
    pure aluminum tweeter, for a total of 6 driver/radiators in each
    speaker. The RSS II's dynamic, spacious and uncolored sonic signature
    has been specifically engineered to blend perfectly with any of
    Definitive's loudspeakers whether freestanding, in-wall or in-ceiling
    for an amazing lifelike sonic experience.

    Informații suplimentare

    Producător

    Disponibilitate

    În stoc furnizor

    Unitate Pret

    Bucata

    Recenzii

    Nu există recenzii până acum.


    Fii primul care adaugi o recenzie la „Boxa Definitive Technology UIW RSS II”

    Tweeter
    Quantity 2
    Diameter 1 (2.54cm)
    Type Pure Aluminum Dome
    Mid / Woofer
    Quantity 2
    Diameter 4 1/2 (11.43cm)
    Type High Definition Bass/Midrange Driver
    Tweeter/Mid Array
    Type Bipolar Configuration
    Bass Radiator
    Quantity 2
    Diameter 4 1/2 (11.43cm)
    Type Planar Bass Radiator
    Electrical
    Audio Inputs
    Speaker Level 1 Pair (Heavy Duty Spring Loaded
    Maximum Sensitivity
    1 watt @ 1 Meter 90 dB
    Total Frequency Response
    Overall 26 Hz – 30 kHz
    Nominal Impedance
    Compatible with 8 ohm
    Compatible with 8 ohm
    Crossover
    A/V Receiver Crossover Setting Small (80 Hz)
    Power Handling 10 – 200 watts per channel
    Installation
    Cut Out Dimensions
    Height 11 5/8 (29.53cm)
    Width 9 7/8 (25.08cm)
    Mounting Depth 3 7/8 (9.84cm)
    Outer Flange
    Height 12 3/4 (32.38cm)
    Width 11 (27.94cm)
    Placement
    Orientation In Wall or In Ceiling
    Cabinet Type
    Speaker Enclosure Sealed Medite
    Product Weight
    Out of Box 12.5 lbs
    Shipping
    Accessories
    Included Accessories Wall Temp

    PENTRU BOXE:

    - Pentru performante optime este necesara pozitionarea boxelor la o distanta de minim 30-40cm de peretele din spate pentru boxele cu bass-reflex in spate, pentru cele cu bass-reflex in fata, recomandam pozitionarea la o distanta de 10-20cm fata de peretele din spate.

    - Boxele vor ajunge sa functioneze in parametrii recomandati de producator, dupa minim 50 de ore (ideal 100 ore) de functionare la volum mediu. In aceasta perioada de timp, de “rodaj a boxelor”, sunetul va fi la inceput ceva mai artificial, bass-ul nu va fi inca controlat, inaltele rigide iar vocile usor retinute, pe masura ce boxele vor functiona, veti remarca cum bas-ul devine mai controlat, mai prezent si mai voluminos, vocile si sunetele medii devin naturale si mai echilibrate, iar inaltele devin rafinate si detaliate. Exista boxe care necesita un „rodaj” mai amplu de minim 300 de ore mai ales in cazul celor care au difuzoare de kevlar, carbon sau alte materiale de acest tip. Boxele care se „rodeaza” cel mai repede sunt cele care au difuzoare de celuloza.

    PENTRU AMPLIFICATOARE, DAC-URI, PREAMPLIFICATOARE, RECEIVER STEREO & HOME CINEMA, SURSE DIGITALE AUDIO-VIDEO:

    - Pentru performante optime este necesar „rodarea” echipamentului, In functie de complexitatea componentelor din aparatul dumneavoastra acesta poate dura intre 30-200 ore.

    - Rodajul se face la volum minim, fiind astfel suficient faptul ca acesta este alimentat corect conform manualului de utilizare la 220-230 Volti si trece semnal audio sau video dupa caz prin el.

    - Echipamentul supus „rodajului” va ajunge sa functioneze in parametrii recomandati de producator, dupa perioada mai sus mentionata. In aceasta perioada de timp, de “rodaj”, sunetul va fi la inceput ceva mai artificial, bass-ul nu va fi inca controlat, inaltele rigide iar vocile usor retinute, pe masura ce echipamentul va functiona, veti remarca cum bas-ul devine mai controlat, mai prezent si mai voluminos, vocile si sunetele medii devin naturale si mai echilibrate, iar inaltele devin rafinate si detaliate.

    PENTRU CABLURI:

    - Pentru performante optime este necesara „rodarea” cablurilor, In functie de complexitatea conductorului folosit, cat si geometriei acestuia, „rodajul” poate dura intre 30-100 ore.

    - Rodajul se face la volum minim, fiind astfel suficient faptul ca va trece semnal audio sau video dupa caz prin el.

    - Cablul supus „rodajului” va ajunge sa functioneze in parametrii recomandati de producator, dupa perioada mai sus mentionata. In aceasta perioada de timp, de “rodaj”, sunetul va fi la inceput ceva mai artificial, pe masura ce cablul va functiona, veti remarca cum bas-ul devine mai controlat, mai prezent si mai voluminos, vocile si sunetele medii devin naturale si mai echilibrate, iar inaltele devin rafinate si detaliate.

    Pentru detalii privind aceste aspecte de rodaj si nu numai, va rugam sa ne consultati!

    Related Products