Produs Antivibratie bFly Audio STAGE

  • Produs Antivibratie bFly Audio STAGE
  • Produs Antivibratie bFly Audio STAGE
  • Produs Antivibratie bFly Audio STAGE
  • Produs Antivibratie bFly Audio STAGE
  • Produs Antivibratie bFly Audio STAGE
Echipa AVmall incearca sa mentina acuratetea informatiilor din acesta prezentare. Cu toate acestea, in anumite cazuri, pot aparea mici inadvertente pentru a caror semnalare va suntem recunoscatori. Ne poti contacta oricand pentru a clarifica eventuale nelamuriri. Nu uita sa mentionezi in corespondenta ta numele exact al produsul. Fotografia produsului Produs Antivibratie bFly Audio STAGE are caracter informativ si poate sa difere de produsul real sau sa contina accesorii neincluse in pachetul standard al produsului. Specificatiile tehnice pot contine erori de operare si pot fi schimbate fara instiintare prealabila de catre producator, neconstituind obligativitate contractuala.
358,66 RON / Bucata

Ai gasit mai ieftin? Suna pentru cea mai buna oferta!


Cantitate:
+
De la: 59.78 lei / luna
Livrarea este gratuita in Bucuresti si provincie (daca comanda depaseste 299 ron), timpul de livrare este de 24-48 de ore, in cazul in care s-a facut confirmarea livrarii de catre AVmall.

Informatii importante legate de vibratii, microvibratii cat si de necesitatea utilizarii unor astfel de produse dedicate (rack audio-video, stand boxe, platforme antivibratii, spike, spike shoes, etc) gasiti in PDF atasat!


Produs Antivibratie/Spike special este destinat oricarui aparat electronic, fiind compus din mai multe elemente, gasiti poza cu structura acestui produs. Totodata este mentionat si felul optim de asezare ale acestui produs sub aparatul electronic

Produs pentru eliminarea vibratiilor si microvibratiilor, eliminare ce duce la o performanta mai buna, un sunet mai clar, un bas mai bine controlat, voci mai naturale, dinamica mai buna. bFly Audio este producator german care dupa 10 ani de teste au ajuns la concluzia ca pentru a reduce vibratiile in toata gama de frecvente este necesar ca produsul folosit sa fie compus din mai multe materiale cum ar fi: sorbothanul, aluminiu, otel, pluta, lemnul si alte astfel de materiale.
Rezultatul optim este dat de alegerea corecta a produselor anitvibratie, bFly Audio practic a descoperit combinatia ideala de materiale, astfel incat toate produsele sale ofera calitate excelnta la cel mai bun pret.
Concurenta din piata vand produse antivibratie la preturi mult mai mari si au rezultate mai slabe pentru sistemul audio

Our STAGE absorber new MK2 Version are an complex redevelopment with the target to combine
coupling effectively with our approved decoupling technology.

For absorption of vibrations we use our proven MLA Technology
with 4 different materials effective combined on 6 layers.

Coupling/Decoupling:
With coupling two units will be joined.
Vibration will be transported controlled between both units.

Decoupling means separation and thus elimination of vibrations,
also called absorption

Therefore our STAGE absorber feet consists of two units.


The Conductor
The hemispherical Conductor has the function to gather vibrations
from the HiFi components and to transfer these in controlled way.
According to the laws of vibrations for an effective junction both units
should have the same material. Because most bases of devices consist
of aluminum, our Conductor consists of aluminum too.

The Conductor collects the vibration over an small cylindrical elevation
at the top side.


The Absorber Corpus

The cylindrical absorber corpus based on our approved MASTER series.
An additional circular layer made of aluminum ensures best lateral stabilization
and serves as entry point for the conductor.

The Effectiveness

The vibrations within HiFi component will be drained of from the conductor and directed transported into the absorber corpus.
Such constructions are not new. But most of them are formed like spikes, with the disadvantage of vertical movements.
Because the conductor is joined orbital with the absorber corpus, vertical movements are excluded and this with minimal contact surface.

Because of the two-layer construction unevenness on the floor of the HiFi components will be balanced.
So the absorber corpus will be mechanical loaded equally and can work on an optimal level.


The Placement:

We advise placement directly under the floor of the component.
Removing of the original feet is not necessary.

We recommend the usage of 3 STAGE absorbers per component.
See figure on the right.
Attention: Place the single absorber on the lighter side of the component.

The construction with 6 layer of 4 different absorber materials eleminates effectively a wide range of disturbance frequencies

The complex layer model
of the absorber corpus

The layers from top to - down

- Ring of aluminum
- Natural rubber
- Sorbothane
- Cork rubber granulate 1mm
- massive Aluminum corpus
- Cork rubber granulate 2mm


Corpus bottom side

For optimal adjustment to the weight of the HiFi component we have developed the following 2 variants.

STAGE-1 up to 8 kg per piece
STAGE-2 up to 20 kg per piece

Read more about our favored absorber material Sorbothane.

STAGE 1 - up to 8 kg per piece

Absorber feet 1 piece - max. load capacity 8 kg per piece

We recommend the usage of 3 STAGE absorbers per component.
Attention: Place the single absorber on the lighter side of the component

Loadable: up to 8 kg per pieces

Diameter: 44 mm

Height: 35 mm


STAGE 2 - up to 20 kg per piece

Absorber feet 1 piece - max. load capacity 20 kg per piece

We recommend the usage of 3 STAGE absorbers per component.
Attention: Place the single absorber on the lighter side of the component

Loadable: up to 20 kg per pieces

Diameter: 54 mm

Height: 48 mm




Specificatii Produs Antivibratie bFly Audio STAGE

Specificatii MLA-Technologie (Multi Layer Adjustment)

Our Concept

Multi Layer: Some selective balanced Layers (Multi Layer) of different absorber materials:Sorbothane, cork, natural rubber etc.
Separated with an non-absorption Metal Layer.

Adjustment: Optimal adjustment to the weight of the Highend unit by different variants (Adjustment)

The Effectiveness

Each Absorber Layer provides filtering ¨of different frequency ranges. ¨Improved cumulative effect compared to single materials.

bFly-audio - Inamicul vibratiilor nedorite

 

Marca german bFly-audio, specializata in tratamente acustice, isi dezvolta produsele pe tehnologia MLA Absorber, o combinatie ideala a unor materiale absorbante fonic, selectate si perfect proportionate pentru a oferi experienta unui sunet cat mai natural. Tehnologie MLA (Multi-Layer Adjustment) presupune suprapunerea mai multor straturi de materiale cu grad de absorbtie fonica ridicat, cum ar fi sorbotanul, pluta sau cauciucul natural, straturile fiind separate de o foaie de aluminiu cu efect non-fonoabsorbant, astfel permitand filtrarea diferitelor game din spectrul de frecvente audio.

Filosofia companiei este construita in jurul conceptului de sunet natural, considerat a fi cea mai importanta recompensa pe care si-ar dori-o un iubitor de muzica de la sistemul sau. bFly-audio ofera o varietate de materiale fonoabsorbante care permit eliminarea unui procent semnificativ din vibratiilor si ecourile nedorite, obtinandu-se astfel un sunet optimizat la maxim. In portofoliul companiei se gasesc solutii complete pentru tratamente acustice, de la materiale absorbante si capcane de bass pana la protectii de spike-uri, solutii antivibratii pentru pick up-uri si chiar un material propriu, bTec, excelent ca si filtru de frecvente joase, mai ales in tandem cu sorbotanul.

Experienta de peste zece ani in industrie permite companiei de tuning audio sa ofere tratamente acustice de cea mai buna calitate pentru orice tipuri de dispozitive si clase de greutate, pastrand, in acelasi  timp, un pret accesibil.

Produs Antivibratie bFly Audio STAGE
PDF 1 Produs Antivibratie bFly Audio STAGE

Nu sunt recenzii pentru Produs Antivibratie bFly Audio STAGE. Fii primul care scrie una!


Spune-ti parerea

Trebuie sa fii autentificat pentru a comenta!

Produse similare