Ai gasit mai ieftin? Suna pentru cea mai buna oferta!
Oferta personalizata si reducere pentru 2 sau mai multe produse. Suna acum si afla!
The Symphonic offers an almost infinite number of input impedance and gain options as well as balanced and unbalanced input option to the cartridge, all externally selectable, with selections signified internally with illuminating LEDs. Also incorporated in the design, is a new low frequency Rumble filter. This device uniquely filters out rumble signals appearing on both channels. The Symphonic has been designed for Moving Coil cartridges only.
The Symphonic Phono stage conforms to the RIAA curve without the IEC roll-off when the Rumble filter is set to off. This is commensurate with the high calibre of Chord amplification. The IEC curve response can be added by setting the Rumble filter to on.
According to the wiring of the tone arm on the record deck used, the Symphonic can be operated in either an unbalanced or balanced mode. All domestic equipment is designed to enable unbalanced operation. Better results will be achieved in balanced operation when used in a complete Chord system.
- Moving Coil 40dBv to 80dBv fully selectable input impedance from 25ohm to 47Kohm
- Input impedance options externally selectable with internal verification
|Specificatii|| Technical Specifications
all with 47pf or 200pf
all with 47pf or 100pf
1.5nV/Hz (approximate - absolute still air)
Max. V rms:
10V - all frequencies undistorted
0dB - 60dB, 40dB @ 1 KHz