Vi DACâ€˛s versatility is unmatched. It features five digital inputs: one USB, one TOSLINK, one AES/EBU, and two S/PDIF. It outputs your analog music in two different ways. First, it has two headphone outputs on the front panel. One 1/4â€ł single-ended output, and one four pin XLR balanced output. Second, it outputs at line level through one pair of RCA single ended outs and one pair of XLR balanced outs. If you choose Vi DAC Tube, youâ€˛ll get another pair of single-ended RCA outputs through the tube buffer stage. Additionally, if you choose the balanced tube output option, youâ€˛ll get another pair of balanced XLR outputs.
Play Every Relevant Formatâ€¦
Vi DAC decodes PCM (the most common music format, the one used in your CDs and MP3s) with bit rates of 16, 24, and 32 bits, and samples rates of 44.1 kHz, 48kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz, 352.8 kHz, and 384 kHz.
It also natively decodes DSD music files (a rapidly-growing digital download format that audiophiles tend to love), letting you choose between five different filter modes, with sample rates of 2.822 MHz, 3.072 MHz, 5.644 MHz, 6.144 MHz, 11.288 MHz, and 12.288 MHz.
We Use One of the Worldâ€˛s Greatest DACs
Viâ€˛s DACâ€˛s design has always been to utilize ESSâ€˛ Sabre 9018AQ2M DAC microchip for its digital to analog conversion. New for 2015, the 9018AQ2M, boasts even better harmonic distortion characteristics than its predecessor, as well as a lower noise floor and greater dynamic range.
Fully Balanced and Dual Mono
Vi DAC uses a fully balanced architecture throughout its entire circuit, which results in the best noise rejection possible, and is the most natural way to cancel distortion. In addition, it uses a dual mono design, implementing dual ESS Sabre DAC chips, a dual separated power supply and a dual analog output stage.
Ultra-Quiet Linear Power Supply
Vi DACâ€˛s linear power supply employs 26 high quality regulators, making it among the quietest linear power in the industry. In addition, the power circuit is completely isolated from the digital and analog circuits, preventing mechanical noise from the transformer from entering the signal path.
Even the Chassis is Exceptional
Vi DACâ€˛s chassis has been designed to damp vibrations within the chassis that could otherwise be converted into electrical noise. By making a design without parallel walls, standing waves donâ€˛t build up in corners, making it less likely that noise will get into the circuit. This innovative design, based on our Da Vinci DACâ€˛s original chassis specification also creates enough internal volume to accommodate larger components such as capacitors and tubes.
Tube Output Option Available
Optional Hybrid Solid-State/Tube Output Buffer-
A DAC has two principal parts: the digital processing stage, and the analog output stage. Vi DACâ€˛s digital stage utilizes an advanced, proprietary solid-state design first implemented in our Da Vinci DAC.
The analog stage is where the magic happens. Vi DACâ€˛s solid-state analog stage is both musical and controlled at the same time. Weâ€˛ve also designed an optional tube output buffer for those aficionados who love the warm and liquid sound of tubes.
|Specificatii|| DAC Chipset
PCM: 44.1, 48, 88.2, 96, 176.4, 192, 352.8, 384 kHz at 16, 24, and 32 bit depths
DSD: 2.822, 3.072, 5.644, 6.144, 11.288, 12.228 MHz /1 bit Both DoP and Direct DSD supported
Dual Mono, Fully Balanced, Class A
Dual Femto Oscillators (one for 44.1 kHz and Integer Multiples, a second for 48 kHz and multiples)
Jitter Removal Technology
Proprietary LH Labs 3L Buffer. Dual-PLL for all digital inputs
26 Individual regulation stages, Bipolar Instant Power
Unbalanced: (1/4â€ť Switchcraft TRS)
Balanced: (4 pin Neutrik)
Headphone Output Power
3.5V/6V/13.8V selectable (0.9 Ohm output impedance)
64-bit Digital Volume Control (All Outputs)
Analog Attenuator (Headphone Outputs)
Analog Line Output
2.1Vrms Unbalanced RCA (47 Ohm output impedance)
4.2 Vrms Balanced XLR
Massive CNC chassis with non-parallel walls
less than 0.003%
better than 116 dB (real world test 119 dB)
17â€ť W x 11â€ť D x 3 1/4â€ť H
Country of Manufacture
Designed and Assembled in the United States