Ai gasit mai ieftin? Suna pentru cea mai buna oferta!
Aliaj de Cupru placat cu Aur cu Euro cap transparent de protectie.
Asamblare conductor cu ┼čurub.
Accept─â cablu ├ś5mm. Set 2 ┼čuruburi.
Cod culoare ro┼ču sau negru.
ViaBlueÔäó TS flexible pins are used for connecting speaker cables with very large cross-sections to clamped connections and terminals. They establish contact to speaker jacks with a gold-plated stranded conductor. The stranded conductor is flexible and approx. 5 cm long. The flexible insulating tubing can be removed.
The ViaBlueÔäó TS Series was designed to provide a connector ideally suited for every possible connection and jack type. All TS connectors protect against short-circuiting with a transparent insulation bushing. The opening to the cable receiver of the TS plug is 5 mm wide so that cables of up to 8 mm2 can be installed.
Easy assembly without soldering.
Speaker cables can be very easily and comfortably installed in ViaBlueÔäó TS plugs. To do this, you will need a stripping tool to strip the cable's insulation as well as a screwdriver (hexagon socket 1.5) to fasten the cable in the plug-in connections. The speaker cable should be stripped approx. 8 mm and then plugged tightly into the internal housing of the TS plug-in connectors. This inner part of the TS plug-in connectors narrows in such a way that the influx of air is cut off. In this way, the stranded conductors are protected from oxidation. The cable can be comfortably tightened by the two large fixing screws and therefore has a very strong grip on the plug. Solder is not necessary. In order to protect even better the sensitive stranded conductors of a high-quality speaker cable from possible stripping by the screwing, as well as against oxidation over the long term, it is advisable to use the ViaBlueÔäó OFC copper crimp sleeves.
Poate mai putin cunoscuta in Romania, dar incontestabil una dintre marcile care se pot lauda fara rezerve cu rezultatele muncii si investitiilor. Specializata in cabluri (de boxe, analog sau digital), dar si in solutii de conectare (si accesorii pentru acestea) si spike-uri, ViaBlue impleteste perfect rigoarea germana cu materiale de cea mai buna calitate si designul modern.
Toate produsele se nasc in departamentul de cercetare/dezvoltare, unul foarte bine pus la punct din punct de vedere tehnic si al resurselor umane, dupa care prototipurile trebuie sa parcurca o serie de teste extrem de severe. Doar produsele care trec de aceste teste ajung in productie, iar utilizatorul acestora va remarca cu siguranta de la primele acorduri plusul de valoare pe care solutiile ViaBlue il aduce unui sistem.