Conector IEC Furutech FI-50(R)

  • Conector IEC Furutech FI-50(R)
1222,04 RON / Bucata 967,82 RON / Bucata
De la: 203.67 lei / luna
Livrarea este gratuita in Bucuresti prin curier AVMall (daca comanda depaseste 299 ron), timpul de livrare este de 24-48 de ore, in cazul in care s-a facut confirmarea livrarii de catre AVmall.
Livrarea este gratuita pentru provincie prin Fan Curier (daca comanda depaseste 500 ron) timpul de livrare este de 24-48 de ore, in cazul in care s-a facut confirmarea livrarii de catre AVmall.

Type: 2-pole+earth
Rating:15A 125V/10A 250V AC
• α (Alpha) Pure Copper Rhodium plated conductor
• Earth (Ground) Jumper System (US Patent No.: 6,669,491 )
• Nylon/fiberglass body incorporating nano sized ceramic particles for absorption of vibration resonance.
• Multi layered nonmagnetic stainless steel and carbon fiber housing and incorporating acetal copolymer. The best of damping and insulation materials for improvements in frequency extension and tonal quality..
• Specified for cable diameters from 6mm to 20mm
• Dimensions: Body length 44mm x 40.5mm diameter x 80.3mm overall length
• Metal cable clamp for improved grip and reduction of mechanically and electrically induced distortion.
Piezo Ceramic Series Connectors • A Furutech First!

FurutechÂ′s Pure Transmission FI-50 Piezo Ceramic series connector bodies and housings feature several breakthrough construction techniques. A multilayer nonmagnetic stainless steel and carbon fiber shell incorporates a special damping and insulating acetal copolymer. Furutech settled on stainless and carbon fiber for the outer housing after extensive listening sessions with Japanese industry figures and audiophiles.

The body of the connectors combines two “active” materials: Nano-sized ceramic particles and powdered carbon. (Only nano-sized ceramic particles effectively couples with carbon powder.) Nylon and fiberglass are incorporated as well forming an extremely effective, well damped, mechanically and electrically nonresonant connector body. ThatÂ′s correct, theyÂ′re electrically damped as well.

Piezoelectric effects are the key. FurutechÂ′s breakthrough in design and materials is based on employing nano-sized polycrystalline ferroelectric ceramic particles exhibiting electro-generative properties; mechanical pressure creates an electrical charge forming a bridge between electrical and mechanical oscillation.

Carbon powder exhibits thermal-conductive characteristics that interact with the charged ferro-ceramic particles converting their energy into heat thatÂ′s conducted away and released from the surface of the connector body!

These carefully chosen and tested “active” materials mechanically and electrically damp the connector and receptacle as they “interconvert” thermal, mechanical, and electrical energy for the finest Furutech Pure Transmission signal imaginable.

Specificatii Conector IEC Furutech FI-50(R)

Specificatii Nota :
Pretul este pe o singura unitate de masura, in cazul cablurilor pe fiecare metru liniar fara conectori; in cazul conectorilor este pentru fiecare bucata in parte. Acest lucru este mentionat langa pret
Pretul expus nu include si eventuala confectionare a cablului/cablurilor, aceasta se face doar in baza unei comenzi ferme si se plateste suplimentar.

Pentru detalii privind aceasta operatiune va rugam sa ne contactati. Exceptie este doar cand in descrierea produsului este mentionat clar ca pretul este pe set sau pereche si totodata este descrisa cantitatea inclusa in acest set.
Pentru nelamuriri nu ezitati sa ne contactati !

L-V : 09.00 - 21.00

Comenzi telefonice/email, consultanta tehnica de specialitate:
Tel: 0721 429 099
Tel: 0749 371 223
Tip Conector IEC conector

Nu sunt recenzii pentru Conector IEC Furutech FI-50(R). Fii primul care scrie una!

Spune-ti parerea

Trebuie sa fii autentificat pentru a comenta!

Produse similare