Cablu Pro Audio pentru Microfon Analysis Plus Big Green

  • Cablu Pro Audio pentru Microfon Analysis Plus Big Green
  • Cablu Pro Audio pentru Microfon Analysis Plus Big Green
633,32 RON
De la: 105.55 lei / luna
Livrarea este gratuita in Bucuresti prin curier AVMall (daca comanda depaseste 299 ron), timpul de livrare este de 24-48 de ore, in cazul in care s-a facut confirmarea livrarii de catre AVmall.
Livrarea este gratuita pentru provincie prin Fan Curier (daca comanda depaseste 500 ron) timpul de livrare este de 24-48 de ore, in cazul in care s-a facut confirmarea livrarii de catre AVmall.

The new BIG GREEN MIC cable uses Analysis Plus patented stacked hollow design. It has three 18 AWG conductors for a very low resistance and with the patented hollow oval design we have a very low inductance to give it a very fast rise time. This design minimizes frequency effects and creates a neutral cable that lets all the music through without smearing or attenuating the signal. We also use the best XLR, most plugs have poor conductivity because they use brass or even steel − we use Abbatron′s new gold-plated Beryllium and Trillium alloy copper contact XLR plugs that provide lower resistance, increased conductivity and greater stiffness for better contact and insertion/extraction durability. Little more flexible than YELLOW OVAL with a killer sound. Everyone who has tried this cable so far has loved it.

Pretul acestui cablu are 3 metri lungime, se poate aduce la comanda si alte dimeniuni cu conectori diferiti. Preturile sunt exprimate in euro si includ TVA

Pentru varianta cu Conector XLR:
3.0 metri = 142 euro
4.5 metri = 196 euro
6.0 metri = 249 euro
9.0 metri = 359 euro
addt ft = 11 euro

Analysis Plus pro cables are fine precision instruments and should be treated that way. Many cable companies treat their cables like a commodity. They will replace the cable without looking at it, because they make the cables for pennies. We are not that type of cable company. We seldom see our cables fail. The connection can fail when people trip or jerk on the ends of the cables and cause damage to the connector, if this is the case we will fix the connector for a fair charge as listed on our website under connectors.

Specificatii Cablu Pro Audio pentru Microfon Analysis Plus Big Green

Specificatii Analysis Plus, Inc. (API) was incorporated in 1993, to provide electrical engineering consulting service to worldwide industrial companies and research institutes.

API is specialized in using computer aided engineering software to help its clients to optimize design, to reduce development cost, and to shorten the time-to-market of new products.

All API engineers have advanced science and engineering degree and at least ten years of experience in their individual fields.

Over the years, API has provided consultancy to many companies and institutes of all sizes, large or small. Majority of them repetitively use API services. The high return rate speaks for the quality and value that API's service provide.

Based on research and development, API also developed award winning cable product for home entertainment industry.

API used electromagnetic FEA software to help an automotive supplier to successfully design an electronic control module to meet SAE and OEM EMC/EMI specification without conducting any EMC/EMI test. Prototyping and testing cost savings were in the millions, let alone the time savings.

API used electromagnetic FEA software to help a medical device manufacturer to design an electric motor too small to prototype. The design parameters were completely determined by analysis results. First prototype passed all the specification. Cost savings were in the millions.

API used electromagnetic FEA and mixed signal system simulation software to help an automotive supplier to analyze an ABS wheel speed sensor assembly failure modes and conditions, and recommended effective circuit and packaging design changes. The re-designed assembly has not experienced any failure yet. The potential part recall cost savings were in the ten million range.

API used electromagnetic FEA software to help an automotive supplier to design a slip electric motor. API also designed and prototyped the electronic slip ratio control unit for the motor. The supplier has obtained several patents for the system and it is in production.

API used mixed signal system simulation software to help an automotive supplier to determine a door lock mechanism failure cause. The consequential fatigue test confirmed the analysis results. The supplier was able to produce the mechanism successfully without any future failure.

API designed a data acquisition system to measure a MRI machine room electromagnetic fields. API then used electromagnetic FEA software to design magnetic shielding for the room. The company responsible for the room construction was able to save tens of thousands dollars in construction material cost alone.

API developed Saber models of a turbo charged diesel engine control mechanism for an automotive supplier. The models are used for OEM DFSS effort. The mechanism has hydraulic, electromagnetic, and electronic components. The models can comprehend thermal environmental, manufacturing part tolerance, and aging effects.

API designed, developed and prototyped an assembly line tester for an automotive electronics supplier to test its in-vehicle entertainment devices. API designed the control and test logic in MATLAB/Simulink and auto-coded. Along with RTOS and device drivers, the code was compiled and flashed into the tester. API also developed PC HMI for the tester. The tester has been used on assembly line ever since.

API produced different level fidelity Saber models of a PFC-capable AC-DC power supply device for an aerospace supplier. The models are used for system simulation to verify power system control stability, EMC/EMI performance, and power system sizing.

API developed an HIL simulation system for an automotive supplier to test heavy-duty truck brake system control module. A typical such system would costs close to a million dollars. This system only costs $65K, besides consulting fees.


Automotive ECU design (electronic and mechanical)
Electromagnetic sensor design (circuit, algorithm, layout, and packaging)
Electric motor design
Electromagnetic actuator design (solenoid, relay, servo-valve, and etc.)
Mixed signal circuit design (analog, digital, and optical)
Magnetic shielding design
PCB design
Data acquisition system design and integration (hardware and software)
HIL (hardware-in-the-loop) testing system design and integration (hardware and software)
Control system design (hardware and software)
Digital signal processing algorithm development


Saber device modeling
Simulink algorithm modeling
Use electromagnetic field FEA (Finite Element Analysis) to solve EMC/EMI (electromagnetic compatibility and electromagnetic interference) problems; to design motor, solenoid, and electromagnetic sensors.
Use mixed-signal system simulation technology to analyze and design complex mechatronics devices and hybrid systems.
Utilize FEA and mixed-signal system simulation to assist in using ECAD (Electronics Computer Aided Design) and MCAD (Mechanical Computer Aided Design) for electronic control module design.
Control algorithm auto code generation
System simulation based control system calibration

Nu sunt recenzii pentru Cablu Pro Audio pentru Microfon Analysis Plus Big Green. Fii primul care scrie una!

Spune-ti parerea

Trebuie sa fii autentificat pentru a comenta!

Produse similare