Cablu de Alimentare Audiomica Jasper Reference Red

  • Cablu de Alimentare Audiomica Jasper Reference Red
  • Cablu de Alimentare Audiomica Jasper Reference Red
2424,60 RON / Bucata
Cantitate:
+
De la: 404.1 lei / luna
Livrarea este gratuita in Bucuresti prin curier AVMall (daca comanda depaseste 299 ron), timpul de livrare este de 24-48 de ore, in cazul in care s-a facut confirmarea livrarii de catre AVmall.
Livrarea este gratuita pentru provincie prin Fan Curier (daca comanda depaseste 500 ron) timpul de livrare este de 24-48 de ore, in cazul in care s-a facut confirmarea livrarii de catre AVmall.

Audiomica Laboratory este o firma din Polonia cu o foarte mare experienta in domeniul cablurilor audio-vide Hiend.
Detalii despre toate produsele Audiomica le puteti gasi in sectiunea Cataloage, unde sunt expuse cu lux de amanunte tehnologia folosita de acest mare producator!

Acest produs face parte din Seria Red, pretul prezentat este pentru un cablu cu dimensiunea de 2m lungime, pentru alte dimensiuni aveti mai jos urmatoarele preturi (Va rugam ca in momentul procesarii comenzii, sa mentionati dimeniunea dorita la rubrica Observatii)
2.0m = 540 euro
3.0m = 622 euro
4.0m = 677 euro

Red Series cables are made either of silver or OFC copper conductors and FEP dielectric. Multi-wire conductors are polished, and the termination is gold-plated. Screen is made of copper braids, aluminium foil and metalized foil. The signal is filtered by DFSS filters. Moreover, the cables are hand-manufactured and tested for electrical correctness in our laboratory.

The series includes:

Speaker cable: Dolomit Reference

Speaker cable: Pirop Reference

Jumpers: Quan Reference

Power cord: Jasper Reference

Analog interconnect: Rhod Reference

Digital interconnect: Alunite Reference

USB interconnect: Carnelian Reference

Firewire interconnect: Bicsbit Reference

HDMI cable: Rubens Reference

In order to enhance current efficiency, Jasper Reference is build of seven 14 AWG electrolytic copper conductors of the highest purity. Each wire consists of 25 helical twisted microconductors. The screen is made from twisted aluminium foil and a dense copper screen. Jasper Reference can be equipped with TFCT filter, which works as a power conditioner.

The cord was designed to reduce a hum level and enhance dimensionality, transparency and dynamics.

The original cord is packed in a signed wooden box. The box includes the certificate of authenticity, a brochure with the description of the series, a product code and a personal quality assurance.

Jasper Reference: dynamic and interference-free sound!

Truly uncompromising power cord! The version with a power conditioner (TFCT filter) available.

Conductors: Seven conductive wires of electrolytic copper
Screen 1: 90% cover dense copper braid
Screen 2: Metalized foil
The outer diameter: 7x14 AWG
Cable diameter: 10 AWG
Filter (conditioner): TFCT (option)
Plugs: Highest quality AC and IEC plugs
Color: Red
Series: RED Series
Many people are not aware of the existence of electromagnetic interference. The sources of natural electromagnetic interference are electrical discharges, dust and sand storms, precipitation and the cosmic radiation from either inside or outside the Solar System. Industrial interference comes from an electrical power grid, ignition systems, whirling machines, radio and TV receivers, power amplifiers, strip lightening, computers and from all kinds of transmitters. Interference can be emitted directly out of those devices in the form of an electromagnetic wave or it can penetrate a power grid.

The following filters were designed to be used with audio devices. The difference in electric properties of conductors resulted in the development of a unique filter for each group of cables.

The screening of the highly sensitive circuits and the accurate filtration of voltage are the basic methods of prevention against hum, noise and power grid interference. We are proud to present our four unique filters:

DFSS − Double Filtering Signal System

TFCT − Two Filters Current Tension

PFSS − Powder Filtering Signal System

DSS − Double Screen System

A DFSS filter is the combination of capacity, ripple and induction filters. The task of the filter is to reduce a variable component in a voltage circuit and to move an input voltage closer to a fixed circuit. Filters use properties of inductive elements, which allows for an energy accumulation. The double-filter system consists of two ferromagnets. A precisely fixed space between them is separated by aluminium and Teflon and as a result lossless signal can be delivered. The key features are the composition of ferromagnets, their size, precisely fixed space between them and a distance to a plug. Moreover, the important part of the construction is ‘the divider′, which in this case is made of Teflon-and-PVC-covered aluminium tape.

TFCT − At the turn of the last decade, an enormous increase in the application of electronic systems is observed in almost all industries so our sensitive audio systems need to be prevented from external interference. This was an incentive for our company to design a unique anti-interference power filter which minimises or even eliminates external interference and guarantee the proper work of electronic devices. In combination with an excellent-screened power cord, the filter converts into a power conditioner. The attenuation of electromagnetic interference in filtering systems is carried out in two directions. Capacitors collect interference from earth, while arranged in series power line reactors increase the impedance of a line, which increases the effectiveness of bypass capacitors. The filter is made on a printed circuit board with the application of the highest quality materials which comply with the RoHS directive.

PFSS − This is the filtration system in which toroidal cores from powder iron are applied in DTP and DTSP chunks. Powder cores belong to the group of magnetic attenuators. Among the group, the cores made of iron powder and alloy powder should be singled out. Their main feature is the high value of saturation induction (1-1,5T), which allows electric currents going through windings to achieve higher value than by the employment of ferrite materials. Material from which the cores are made shows high initial permittivity. As a result, the cores enable to build an anti-interference choke, which stores impulse energy and is called an air gap choke. The applied materials and the appropriate placement of the core allow for the modelling of such cable property as inductivity, which is very useful in designing and controlling high quality audio cables.


DSS screening system − minimises the interference caused by an external electromagnetic or radio field. The DSS system applies the exceptional weave of the multiconductor cable which eliminates interference by neutralizing the mutual electric current induction through the magnetic field generated by neighbouring wires. The task of the DSS system is to deliver the purest signal that has been previously filtered by TFCT, DFSS and PFSS to a device.

Specificatii Cablu de Alimentare Audiomica Jasper Reference Red

Specificatii Audiomica Laboratory este o firma din Polonia cu o foarte mare experienta in domeniul cablurilor audio-vide Hiend.
Detalii despre toate produsele Audiomica le puteti gasi in sectiunea Cataloage, unde sunt expuse cu lux de amanunte tehnologia folosita de acest mare producator!

Acest produs face parte din Seria Red, pretul prezentat este pentru un cablu cu dimensiunea de 1m lungime si se vinde bulk, fara conectori
Acest produs se poate folosi ca si cablu de boxe dar si ca si cablu de alimentare, calitate extraordinara !

Red Series cables are made either of silver or OFC copper conductors and FEP dielectric. Multi-wire conductors are polished, and the termination is gold-plated. Screen is made of copper braids, aluminium foil and metalized foil. The signal is filtered by DFSS filters. Moreover, the cables are hand-manufactured and tested for electrical correctness in our laboratory.

The series includes:

Speaker cable: Dolomit Reference

Speaker cable: Pirop Reference

Jumpers: Quan Reference

Power cord: Jasper Reference

Analog interconnect: Rhod Reference

Digital interconnect: Alunite Reference

USB interconnect: Carnelian Reference

Firewire interconnect: Bicsbit Reference

HDMI cable: Rubens Reference

Pirop Reference can be used either as a speaker cable or a power cord.

In order to enable the variety of applications, Pirop Reference consists of eight numbered wires, which are made of 6N copper (99,99997% purity). The copper conductor and a multi-wire screen are protected with tin alloy, which inhibits copper oxidation and improves installation properties. The cable is screened in Double Screening System: aluminium foil (100% coverage) and a multi-wire braid (70% coverage). As a dielectric, we use PVC foam that is injected at high-pressure providing exceptional anti-vibration protection. Thanks to advanced isolation and textile fibres the cable is flexible despite its large outer diameter.



Conductor: Eight CU N6 conductors
The outer diameter: 8x16 AWG
Cable diameter: 10 AWG
Screen 1: Aluminum foil
Screen 2: Copper round braid
Microconductors: 256 (32x8)
Single-wire: Yes - 2x4/2x4 (6mm2 per channel)
Bi-wire: Yes - 2x4/4x2 (6/3mm2 per channels)
Bi-amp: Yes - 4x2/4x2 (3/3mm2 per channels)
Color: Red
Series: RED Series

Many people are not aware of the existence of electromagnetic interference. The sources of natural electromagnetic interference are electrical discharges, dust and sand storms, precipitation and the cosmic radiation from either inside or outside the Solar System. Industrial interference comes from an electrical power grid, ignition systems, whirling machines, radio and TV receivers, power amplifiers, strip lightening, computers and from all kinds of transmitters. Interference can be emitted directly out of those devices in the form of an electromagnetic wave or it can penetrate a power grid.

The following filters were designed to be used with audio devices. The difference in electric properties of conductors resulted in the development of a unique filter for each group of cables.

The screening of the highly sensitive circuits and the accurate filtration of voltage are the basic methods of prevention against hum, noise and power grid interference. We are proud to present our four unique filters:

DFSS − Double Filtering Signal System

TFCT − Two Filters Current Tension

PFSS − Powder Filtering Signal System

DSS − Double Screen System

A DFSS filter is the combination of capacity, ripple and induction filters. The task of the filter is to reduce a variable component in a voltage circuit and to move an input voltage closer to a fixed circuit. Filters use properties of inductive elements, which allows for an energy accumulation. The double-filter system consists of two ferromagnets. A precisely fixed space between them is separated by aluminium and Teflon and as a result lossless signal can be delivered. The key features are the composition of ferromagnets, their size, precisely fixed space between them and a distance to a plug. Moreover, the important part of the construction is ‘the divider′, which in this case is made of Teflon-and-PVC-covered aluminium tape.

TFCT − At the turn of the last decade, an enormous increase in the application of electronic systems is observed in almost all industries so our sensitive audio systems need to be prevented from external interference. This was an incentive for our company to design a unique anti-interference power filter which minimises or even eliminates external interference and guarantee the proper work of electronic devices. In combination with an excellent-screened power cord, the filter converts into a power conditioner. The attenuation of electromagnetic interference in filtering systems is carried out in two directions. Capacitors collect interference from earth, while arranged in series power line reactors increase the impedance of a line, which increases the effectiveness of bypass capacitors. The filter is made on a printed circuit board with the application of the highest quality materials which comply with the RoHS directive.

PFSS − This is the filtration system in which toroidal cores from powder iron are applied in DTP and DTSP chunks. Powder cores belong to the group of magnetic attenuators. Among the group, the cores made of iron powder and alloy powder should be singled out. Their main feature is the high value of saturation induction (1-1,5T), which allows electric currents going through windings to achieve higher value than by the employment of ferrite materials. Material from which the cores are made shows high initial permittivity. As a result, the cores enable to build an anti-interference choke, which stores impulse energy and is called an air gap choke. The applied materials and the appropriate placement of the core allow for the modelling of such cable property as inductivity, which is very useful in designing and controlling high quality audio cables.


DSS screening system − minimises the interference caused by an external electromagnetic or radio field. The DSS system applies the exceptional weave of the multiconductor cable which eliminates interference by neutralizing the mutual electric current induction through the magnetic field generated by neighbouring wires. The task of the DSS system is to deliver the purest signal that has been previously filtered by TFCT, DFSS and PFSS to a device.

Nu sunt recenzii pentru Cablu de Alimentare Audiomica Jasper Reference Red. Fii primul care scrie una!


Spune-ti parerea

Trebuie sa fii autentificat pentru a comenta!

Produse similare