Ai gasit mai ieftin? Suna pentru cea mai buna oferta!
Oferta personalizata si reducere pentru 2 sau mai multe produse. Suna acum si afla!
SUPRA LoRad 3x2.5 MkII
LoRad means LOw RADiation and the design of these cables minimises both electrical and magnetic fields. LoRad protects both from fields radiating from the cable as well as pick-up of surrounding noise fields, e.g. wireless and mobile phones, radio broadcasts, etc. LoRad MkII is a development of the Lorad concept, now with improved shielding properties, flexibility, bend-resistance and strength.
The radiation is lowered by means of two techniques. First the shield
minimises the alternating electrical fields from the cable. It also
minimises the RF pick-up (Radio Frequency). The magnetic fields are
cancelled by twisting the conductors in a short pitch.
The benefits are cleaner sound, pronounced transients and an improved 3D soundstage. We also hear customers describe more detailed sound and we are not surprised. If your equipment is installed using SUPRA cables, the noise floor is generally suppressed by several dB, allowing more of the content to be revealed. Low radiating cables is also increasingly important from a health point of view. Science has proven that alternating magnetic fields affects cell growth.
The biggest differences between LoRad MkII and the old LoRad cable, is that it is now based on SUPRA′s unique Nylon screen concept. Semiconducting Nylon Screen provides improved shielding properties, bending strength, environmental immunity, higher tensile strength and less microphonic effect. The Nylon screen is connected with a drain-wire. We have tested and evaluated all known types of screens for making such a good cable as possible. SUPRA′s semi-conductive Nylon screen was the only one that passed the safety requirements and, moreover, its shielding properties was best in test. LoRad MkII is tested and certified by Intertek Sweden, meeting the European safety regulation HD21.5 S3.
The cable must be connected to a wall socket with a ground terminal for the full LoRad effect.
|Specificatii||Wires: 3x2.5mm2, Tin plated 320x0.10 OFC.
Conductor insulation: Dual layer PVC. Green/Yellow, Blue & Brown.
Fillers/Armoring: Yarn, 3 pcs.
Screen connection: Drain wire, Ultra flexible, Tin plated 66x0.07 OFC.
Armoring & insulation: Woven polyester tape
Screen: Woven Semi-conductive Nylon/Carbon tape.
Restistance/conductor: 6.8 Ohm/km.
Voltage Nom.: 110-250 V
Current: Nom.: 16 A
Pretul este pe o singura unitate de masura, in cazul cablurilor pe fiecare metru liniar fara conectori; in cazul conectorilor este pentru fiecare bucata in parte. Acest lucru este mentionat langa pret
Pretul expus nu include si eventuala confectionare a cablului/cablurilor, aceasta se face doar in baza unei comenzi ferme si se plateste suplimentar.
Pentru detalii privind aceasta operatiune va rugam sa ne contactati. Exceptie este doar cand in descrierea produsului este mentionat clar ca pretul este pe set sau pereche si totodata este descrisa cantitatea inclusa in acest set.
Pentru nelamuriri nu ezitati sa ne contactati !
L-V : 09.00 - 21.00
Comenzi telefonice/email, consultanta tehnica de specialitate:
Tel: 0721 429 099
Tel: 0749 371 223