Ai gasit mai ieftin? Suna pentru cea mai buna oferta!
Oferta personalizata si reducere pentru 2 sau mai multe produse. Suna acum si afla!
Pretul este pentru 1 pereche
Designed and Manufactured in Canada.
Paradigm Monitor Series Series: Since its inception, the Monitor Series from our affordable audiophile collection has been a favorite of audiophiles on a budget. Satin-anodized pure aluminum domes, carbon-infused pure-aluminum bass/midrange cones and polypropylene bass cones. Wire mesh tweeter and WaveGuide™ technology with a clean, linear aesthetic. Rich wood grain veneer finishes.
Advanced S-Pal™ Satin-Anodized Pure-Aluminum Bass/Midrange Cones. First seen in our Paradigm Reference lineup, very high stiffness-to-mass ratio and outstanding internal damping. The result? Remarkable midrange clarity, superb extended bass response and freedom from unwanted resonances and distortions. In an affordable audio category − unbelieveable quality!
Advanced Carbon-Infused Injection-Molded Polypropylene Bass Cones. The high mineral content and injection-molding process have created a durable and rigid cone with affords us bragging rights for cone consistency and repeatability.
Advanced S-Pal™ Satin-Anodized Pure-Aluminum Domes with powerful neodymium magnets and ferro-fluid cooling for increased power handling! Highs are more soaring and spacious, crystal clear and undiluted even at the higher bandwidths.
Sophisticated crossovers in an affordable audiophile product! Again, it′s almost unheard of: polypropylene film or bipolar electrolytic capacitors, air core and laminated core inductors, high-power resistors. Crossover topologies are first and second-order with corresponding acoustic slopes of second and third-order providing optimal bandwidth and seamless integration as drivers cross over.
Long-Travel Motor/Magnet Structures. Despite fewer drivers than in previous series′, floorstanding and center channel speakers actually plumb deeper. This is, in part, attributable to the advanced motor/magnet structures: high-temperature copper or aluminum wire voice coils (varies by model) wound on Kapton formers, oversized magnets with all components FEA-optimized.
Foam-Rubber Elastomer Surrounds. Reference Studio Series geometry! Help achieve that play loud AND play deep effect by allowing longer, expertly controlled cone travel.
A clean aesthetic, nothing to see but the the beautiful drivers, no screws or fasteners visible. Thick and rigid ¾Ë MDF across the lineup FEA-optimized (including a stress analysis) to overcome the limitations of the physical materials. A modal frequency analysis allowed us to deliver the most resonance-, vibration- and coloration-free Monitor Series cabinet to date! Critically tuned to the rest of the cabinet.
|Specificatii||Design 2-driver, 2-way bass reflex,
quasi-3rd-order resistive port,
bookshelf / stand-mounted
Crossover 2nd-order electro-acoustic at 2.0 kHz
High-Frequency Driver 25-mm (1 in) S-PAL™ dome tweeter,
ferro-fluid cooled and damped
Bass / Midrange Driver 165-mm (6-1/2 in) S-PAL™ cone
25-mm (1 in) high-temperature
voice-coil, oversize ceramic /
ferrite magnets, GRIP™ chassis
Low-Frequency Extension (-3dB) 42 Hz (DIN)
On-Axis ±2 dB from 75 Hz - 22 kHz
30° Off-Axis ±2 dB from 75 Hz - 18 kHz
Sensitivity - Room / Anechoic 90 dB / 87 dB
Suitable Amplifier Power Range 15 - 100 watts
Maximum Input Power† 80 watts
Impedance Compatible with 8 ohms
Height, Width, Depth 34.3 cm x 19.4 cm x 26.5 cm
Weight (unpacked) 7.7 kg / 17 lb each
Finishes Black Ash, Heritage Cherry