Amplificator Integrat BC Acoustique EX-888

  • Amplificator Integrat BC Acoustique EX-888
  • Amplificator Integrat BC Acoustique EX-888
  • Amplificator Integrat BC Acoustique EX-888
  • Amplificator Integrat BC Acoustique EX-888
  • Amplificator Integrat BC Acoustique EX-888
  • Amplificator Integrat BC Acoustique EX-888
Echipa AVmall incearca sa mentina acuratetea informatiilor din acesta prezentare. Cu toate acestea, in anumite cazuri, pot aparea mici inadvertente pentru a caror semnalare va suntem recunoscatori. Ne poti contacta oricand pentru a clarifica eventuale nelamuriri. Nu uita sa mentionezi in corespondenta ta numele exact al produsul. Fotografia produsului Amplificator Integrat BC Acoustique EX-888 are caracter informativ si poate sa difere de produsul real sau sa contina accesorii neincluse in pachetul standard al produsului. Specificatiile tehnice pot contine erori de operare si pot fi schimbate fara instiintare prealabila de catre producator, neconstituind obligativitate contractuala.
8900,00 RON

Ai gasit mai ieftin? Suna pentru cea mai buna oferta!

De la: 1483.33 lei / luna
Livrarea este gratuita in Bucuresti si provincie (daca comanda depaseste 299 ron), timpul de livrare este de 24-48 de ore, in cazul in care s-a facut confirmarea livrarii de catre AVmall.

The EX888 is a tubes amplifier using KT88 power tubes and 12AX7/12AU7 for pre-amplification. We wanted to achieve with the EX-888 an amplifier with an exceptional sound that honours the legend of tubes but also benefiting from a reserve of power that allows easy association with the majority of speakers in the market.
To achieve our goals, we used a proven pattern but with some unpublished parts (including a so-called anode follower), which allowed us to reconcile a low rate of reaction against (ensuring maximum power) and a very low level of distortion (less than 1% with a gradient odd harmonics characteristic of achievements tubes).

Optional board slot
Massive continuous power of 500VA transformer

Power supply
It is based on a very high quality impregnated EI transformer capable of delivering a continuous power of 550VA. The diodes used in the rectifier bridge are broadband-like to ensure a continuous tension as pure as possible. Finally the filter is achieved by an innovative structure called CLC ie the equivalent of a third order filter for a perfect smoothing of the output voltage.
Output transformer
The winding of the output transformer uses a structure to achieve perfect symmetry output stages and the same minimal distortion. They use a deoxygenated copper wire. They are very generously sized to pass the entire dynamics of the output stage. They are wound in 3Ω and 6Ω (normed 4Ω and 8Ω) whereas the trend (long ago) prevailing in speaker manufacturers.
The volume knob is a motorized with APLS potentiometer.
Capacitors links are aluminum insulated polypropylene sheet.
They come from renowned manufacturer SOLEN.
The resistors areall high power.
Double side soldering.
The circuit is printed on epoxy and 70 microns thick.

Specificatii Amplificator Integrat BC Acoustique EX-888

Specificatii Alte caracteristici: Tubes: KT88×4 12AX7×2, 12AU7×2
Input Sensitivity: 360 mV (700 mV bypass)
Input impedance: 100kΩ
Dimensiuni: 430x200x405 mm
Greutate: 25 kg
Putere RMS: 2 x 40W (ultra-linear mode) or 2 x 20W (in triode mode)
Raport Semnal/zgomot: ≥ 93dB
Raspuns in frecventa: 10Hz ~ 38kHz (-1 dB)
THD: ≤ 1% (1kHz)
Tip Echipament Cu Tuburi

Nu sunt recenzii pentru Amplificator Integrat BC Acoustique EX-888. Fii primul care scrie una!

Spune-ti parerea

Trebuie sa fii autentificat pentru a comenta!

Produse similare